DEVELOPMENT AND IMPROVEMENT OF BEAM STRUCTURES ON THE BASIS OF COMPOSITE LOGS’ GIRDERS
https://doi.org/10.26518/2071-7296-2018-5-760-773
Abstract
Introduction. Experience in the design and construction of beam structures of wooden bridges with composite girders indicates the possibility of increasing the bearing capacity and the length of the overlapped spans.
Materials and methods. The most rational load-bearing elements of composite girders can serve as the logs edged on two edges with the diameter of 28 to 32 cm with the maximum use of the most durable layers of sapwood and dowel connections of steel plates with blind cylindrical nags.
Results. In contrast to the compounds of composite girders on lamellar nails, the proposed connection greatly simplifies the process of making the composite girders. Such connection also allows using the logging along the length, combining into three or four tiers and increasing the length of the span.
Discussion and conclusion. The proposed solutions increase the load-bearing capacity of composite girders and allow them to be used in the structures of wooden bridges under modern automotive loads. Moreover, the calculation method of composite girders on the basis of the method of forces and discrete placement in the beams between the logs of concentrated elastic-datum shear bonds is developed.
About the Authors
V. A. Utkin
Siberian State Automobile and Highway University
Russian Federation
Russian Federation
Utkin Vladimir Alexandrovich - Doctor of Technical Science, Professor of the Bridges and Tunnels Department.
644080, Omsk, 5, Mira Ave.
P. N. Kobzev
Siberian State Automobile and Highway University
Russian Federation
Russian Federation
Kobzev Pavel Nikolaevich - Candidate of Technical Science, Associate Professor of the Bridges and Tunnels Department.
644080, Omsk, 5, Mira Ave.
E. G. Shatunova
Siberian State Automobile and Highway University
Russian Federation
Russian Federation
Shatunova Elena Gennadievna - Master, IMA, SM17-MA8.
644080, Omsk, 5, Mira Ave.
References
1. Gibshman E.E. Proektirovanie derevyannyh mostov [Design of wooden bridges]. Moscow, Transport, 1976. 272 p. (in Russian)
2. Utkin V.A., Puzikov V.I., Kobzev P.N. Opyt vnedreniya novyh doshchato-gvozdevyh proletnyh stroenij v dorozhnom stroitel’stve Omskoj oblasti [Experience in the implementation of new board-and-nail structures in the road construction in Omsk region]. DOROGIIMOSTY, 2008, pp. 162-171. (in Russian).
3. Utkin V.A., Puzikov V.I., Kazantsev B.V., Karetnikov M.YU. O primenenii drevesiny dlya stroitel’stva mostov [On the use of wood for bridge construction]. DOROGI I MOSTY, 2014, pp. 127142. (in Russian).
4. Nikolai B.L. Teoriya rascheta nagel’nyh sopryazhenij v derevyannyh konstruktsiyah [Theory of calculation of the dowel mates in wooden structures]. Har’kov: ONTI, 1935. 65 p. (in Russian)
5. Kochenov V.M. Nesushchaya sposobnost’ ehlementov i soedinenij derevyannyh konstruktsij [Bearing capacity of elements and joints of wooden structures]. Moscow, 1953. 319 p. (in Russian)
6. Ivanov V.F. Derevyannye konstruktsii [Wooden structure]. Moscow, Strojizdat, 1956. 317 p. (in Russian)
7. ZHilkin V.A. CHislennoe issledovanie deformirovannogo sostoyaniya nagel’nogo soedineniya iz drevesiny sosny [Numerical investigation of the strain state of the pin connections from pine wood]. ZHurnal APK Rossii, 2014. Vol. 70. Pp. 55-60. (in Russian)
8. ZHilkin V.A. Issledovanie deformirovannogo sostoyaniya tsilindricheskogo nagelya v simmetrichnom dvuhsreznom soedinenii plastin iz drevesiny [Investigation of the strained state of a cylindrical pin in a symmetrical double-shear connection plates wood]. ZHurnal APK Rossii, 2015, Vol. 71, pp. 29-41. (in Russian)
9. Rozhko P.P., Kulish V.I. Issledovanie nesushchej sposobnosti stal’nyh nagelej v derevobetonnyh mostah [Research of the bearing capacity of the steel pins in wooden concrete bridges]. Trudy Hab. PI, 1966, no. 3, pp. 21-26. (in Russian)
10. Kulish V.I. Issledovanie raboty i raschet na prochnost’ derevozhelezobetonnyh balok [Research of work and strength calculation of wood-concrete beams]. Stroitel’stvo zheleznyh dorog i ehkspluataciya puti, 1967, pp. 120-127. (in Russian).
11. Kulish V.M. Kleenye derevyannye mosty s zhelezobetonno plitoj [Glued wooden bridges with reinforced concrete slab]. Moscow, Transport, 1979. 160 p. (in Russian)
12. Dmitriev P.A. Issledovanie prochnosti drevesiny na smyatie v otverstii pri kratkovremennom i dlitel’nom dejstvii nagruzki [Research of the wood strength to crumple in the hole at short-term and long-term load]. Izvestiya vuzov. Stroitel’stvo i arhitektura,1965, no. 12, pp. 165-173. (in Russian).
13. Kormakov L.I., Valentinavichyus A. YU. Proektirovanie kleenyh derevyannyh konstrukcij [Design of glue wooden structures]. Kiev, Budil’nik, 1983. 152 p. (in Russian)
14. Wiio M., JutilaA.,. Makipuro R, Salokangas L., Wistbaka J. Research project development of wood bridges, literature survey of shear connections of wood-concrete composite bridges. Helsinki University of Technology, Laboratory of bridge Engineering, 1994, no.7, p. 14.
15. Kleevye soedineniya drevesiny i betona v stroitel’stve [Adhesive joints of wood and concrete in construction]. SHutenko L.N., Klimenko V.Z., Kuznecov YU.D., Zolotov M.S., CHerkasskij I.G., Kiev, Budil’nik, 1990. 136 p. (in Russian)
16. Haakana P., Jutila A., Rautakorpi H., Salokangas L. Research project development of wood bridges, survey of source documents. Exept of the Finnich Report Survey of background information. Helsinki University of Technology, Laboratory of bridge Engineering, 1993, no. 2, p. 46.
17. Makipuro R., Jutila A., Rautakorpi H., Salokangas L. Research project development of wood bridges, experimental studies of wood-concret shear connections. Helsinki University of Technology, Laboratory of bridge Engineering, 1994, no. 11, p. 26.
18. Stukov V.P. Derevozhelezobetonnye balochnye mosty na avtomobil’nyh dorogah [Wood-reinforced concrete beam bridges on roads]. Arhangel’sk, 2009. 453 p. (in Russian)
19. Stukov V.P. Derevozhelezobetonnye balochnye mosty: sostoyanie, teoriya, issledovanie, proektirovanie [Wood-concrete beam bridges: state, theory, research, design]. Arhangel’sk, 2014. 316 p. (in Russian)
20. Smirnov P.N. Sravnenie metodik rascheta nagel’nyh soedinenij derevyannyh konstrukcij. Otechestvennyj i zarubezhnyj opyt [Comparison of methods of calculation dowel joints of wooden structures. Domestic and foreign experience]. Stroitel’naya mekhanika i raschet sooruzhenij, 2013, no. 6. pp. 68-72. (in Russian).
21. Smirnov P.N. Osobennosti raboty nagel’nyh soedinenij so stal’nymi nakladkami i prokladkami. Metodika rascheta [Features the work of pin joints with steel plates and gaskets. Method of calculation]. Stroitel’naya mekhanika i raschet sooruzhenij, 2015, no. 2. pp. 19-25. (in Russian).
22. Rzhanicyn A.R. Stroitel’naya mekhanika [Structural mechanics]. Moscow, Vysshaya shkola, 1982. 400 p. (in Russian)
23. Utkin V.A., Sinigovskaya N.V. Issledovanie nesushchej sposobnosti sostavnyh progonov s soedineniyami na gluhih cilindricheskih nagelyah, zashchemlennyh v stal’nyh plastinah [Research of bearing capacity of composite girders with connections to the deaf cylindrical pins, clamped in steel plates]. Vestnik SibADI, 2016, no 5(51), pp. 134-145 (in Russian).
Review
For citations:
Utkin V.A., Kobzev P.N., Shatunova E.G. DEVELOPMENT AND IMPROVEMENT OF BEAM STRUCTURES ON THE BASIS OF COMPOSITE LOGS’ GIRDERS. The Russian Automobile and Highway Industry Journal. 2018;15(5):760-773. (In Russ.) https://doi.org/10.26518/2071-7296-2018-5-760-773
Views:
651
Email this article 