DETERMINATION OF THE PARAMETERS OF ROCKY ROUGHNESS FORMATION DEVICE’S ON AN ICE-COVERED ROAD
https://doi.org/10.26518/2071-7296-2017-3(55)-16-21
Abstract
The article is devoted to the definition of the parameters of the device to form roughness on the icy road surface. This paper describes the design features of the device to form roughness on the icy road surface, which allows the formation of irregularities on the icy surface of a mountain road due to wastage on an icy road surface the hot rocky particles. The rocky particles are recessed in the ice cover due to the positive temperature and their own gravity. A design scheme of interaction of the distribution of the drum with a rubber sleeve with rocky particle was work out. The conditions involving rocky particle distribution drum are pointed. The dependences, for determining angles of stony particles and capture the outer diameter of the distributor drum are found.
About the Authors
Zh. T. GaparovaKyrgyzstan
Gaparova Zhanarkan Tahtahunovna – Senior Researcher, Research Institute of Physical and Technical Problems
(720044, Bishkek, Ch.Aitmatov ave., 66)
J. J. Turgumbaev
Kyrgyzstan
Turgumbaev Jenishbek Jumadilovich – Doctor of Technical Sciences, Professor, Professor of Department of Mechanics and industrial engineering
(720044, Bishkek, Ch.Aitmatov ave., 66)
References
1. Alexandrov A.S., Alexandrova N.P. Nekotorye osobennosti rascheta vtaplivania sherohovatostei v uprugoviazkoplasticheskii material dorojnogo pokrytia [Some peculiarities of calculation embed roughness in elastoviscoplastic material of the road surface]. Roads and bridges - 2003, no 1, pp. 12-19.
2. A Practical Guide for Snow and Ice Control: The Snowfighter’s Handbook. – Alexandria. Virginia, USA: The Salt Institute, 2013, pp. 24.
3. Barpiev A.Zh., Zholdosheva G.Zh. Vlianie uvelichenia intensivnosti dvijenia avtomobilei po gornym dorogam na kolichestvo DTP [The Influence of increasing intensity of car traffic on mountain roads the number of traffic accidents]. Science and New Technologies. – Bishkek, 2014, no 2, pp. 25-27.
4. Sharshembiev Zh.S. Analiz prirodno-klimaticheskih faktorov, vliauishih na pokazateli ekspluatationnyh svoistv kolesnyh mashin v gornyh usloviah [Analysis of climatic factors influencing the performance properties of wheeled vehicles in the mountains]. Izvestiya vuzov. – Bishkek, 2011, no 7, pp. 17-21.
5. Walus K.J. Analysis of Tire-road Contact Under Winter Conditions. Proceedings of the World Congress on Engineering. Vol. III, July 6 – 8, 2011, London, UK. – pp. 2381-2384.
6. Joseph Stromberg. What Happens to All the Salt We Dump On the Roads? Smithsonian.com. January 6, 2014. Read more: http://www.smithsonianmag.com/science-nature/what-happens-toallthe-salt-we-dump-on-the-roads-180948079/№ 4Ckkj7jb4xBd9971.99.
7. Turgumbaev J.J., Gaparova Zh.T. Tekhnologia I oborudovanie dlia uluchshenia stsepnyh svoistv snejnoi poverhnosti gornoi dorogi [Technology and equipment to improve grip properties of the snow surface mining road]. Vestnik SibADI – Omsk, 2005, no 2 – pp. 81-85.
8. Turgumbaev J.J., Gaparova Zh.T., Turgumbaev S.Zh. Ustroistvo dlia obrazovania sherohovatosti na ledianoi poverhnosti dorogi [The device for the formation of roughness on the ice surface road]. Patent KR, no 20100062.1, 2011.
Review
For citations:
Gaparova Zh.T., Turgumbaev J.J. DETERMINATION OF THE PARAMETERS OF ROCKY ROUGHNESS FORMATION DEVICE’S ON AN ICE-COVERED ROAD. The Russian Automobile and Highway Industry Journal. 2017;(3(55)):16-21. (In Russ.) https://doi.org/10.26518/2071-7296-2017-3(55)-16-21