ANALYSIS OF MATHEMATICAL MODELS WORKING PROCESS MILLS ROAD WITH DESTRUCTION ASPHALT CONCRETE
https://doi.org/10.26518/2071-7296-2017-3(55)-120-125
Abstract
This article deals with the mathematical model of the working process of a road milling machine equipped with a system for controlling the loading of an internal combustion engine, the relationship between the torque on the shaft of the internal combustion engine, the hourly fuel consumption, the productivity of the road milling cutter, the energy efficiency from the traversed path without control systems and with a two-loop control system.
About the Authors
S. D. Ignatov
SibADI.
Russian Federation
Russian Federation
Sergey Ignatov – Ph.D., Associate Professor of the Department “Automation of production processes and Electrical Engineering”
(644080, Omsk, Mira, 5 prospect)
N. S. Sherstnev
SibADI.
Russian Federation
Russian Federation
Sherstnev Nikita – postgraduate student of the Department “Automation of production processes and Electrical Engineering
(644080, Omsk, Mira, 5 prospect)
References
1. Krasnoludsky A.V. Opredelenie racionalnyh parametrov excentrichnoi dorojnoi frezi [Determination of rational parameters of eccentric road milling machine]. - Saratov, Saratov State Technical University, 2004, pp. 177.
2. Sherstnev N.S., Ignatov S.D. Calculation of engine power road cutters. Development of road transport and building complexes and development of strategically important areas. With 34 of Siberia and the Arctic: the contribution of science: materials of the International scientific and practical conference. – Omsk, SibADI, 2014, vol. 2, pp. 79-81.
3. Slugda 111 [Electronic resource]. Mode of access: http://slugba111.ru/stati/chto-takoedorozhnaya-freza.html (reference date 05/03/2017)
4. Kuznetsova V.N., Kiryushkina N.A. Analysis of the theory and practice of road milling machines. Fundamental and applied science – the Foundation of modern innovation system: Materials of international scientific-practical conference of students, postgraduates and young scientists, Omsk, SibADI, 2015, pp. 174-178.
5. Kokorin A.V., Sukharev R.Y. Mathematical model of the control system of working body road mill. Vestnik of Voronezh state technical University, 2009, pp. 147-149.
6. Shcherbakov V.S., Ruppel A.A., Lazuta I.V., Milyushenko S.A. Modelirovanie zemleroinotransportnyh mashin v srede Matlab-Simulink [Modeling of earth-moving machines in the environment Matlab-Simulink]. – Omsk, Siberian automobile and highway Academy, 2010, pp. 42.
7. Ulyanov N.A. Teoriya samohodnyh kolesnyh zemleroinu-transportnyh mashin [The theory of self-propelled wheeled Earthmovers]. – Moscow, Mechanical engineering, 1969, pp. 520 c.
8. Spin the motor [Electronic resource]. Mode of access: http://krutimotor.ru (accessed 05.03.2017)
Review
For citations:
Ignatov S.D., Sherstnev N.S. ANALYSIS OF MATHEMATICAL MODELS WORKING PROCESS MILLS ROAD WITH DESTRUCTION ASPHALT CONCRETE. The Russian Automobile and Highway Industry Journal. 2017;(3(55)):120-125. (In Russ.) https://doi.org/10.26518/2071-7296-2017-3(55)-120-125
Views:
866
Email this article 