Preview

The Russian Automobile and Highway Industry Journal

Advanced search

Installation for maintaining the operating temperature of electrolytes when restoring machine parts with electroplated coatings

https://doi.org/10.26518/2071-7296-2020-17-4-500-511

Abstract

Introduction. The use of electroplating in the production and restoration of machine parts is important for increasing reliability and reducing costs in the operation of cars. At the same time, strengthening and restoring parts with chrome, iron and alloys based on them leads to additional costs, due to the specifics of technologies and the need to maintain certain operating temperatures of electrolytes to obtain high-quality and high-performance precipitation. Since existing devices for maintaining the temperature of the electrolyte have a complex design and require additional energy costs, we are constantly searching for ways and designs that will simplify the design, increase its reliability and reduce energy costs.

Materials and methods. The current method for maintaining the temperature of electrolytes of current bath is taken as a prototype for the research. An improved plant was designed and tested in real conditions for the production of chrome, iron precipitation and alloys based on them.

Results. The developed installation makes it possible to reduce energy consumption and improve the quality of electrolytic coatings. The developed installation allowed maintaining the temperature in the required range, both at low temperatures of 20÷35oC and at high temperatures of 40÷60oC.

Discussion and conclusion. As a result of the analysis of the existing methods for maintaining the temperature of the electrolyte, their shortcomings are identified and a new method is proposed that will allow controlling and maintaining the necessary operating temperature of the electrolyte in the required operating range without significant fluctuations. The developed installation can be put into production, which will allow industrial use of complex temperature-sensitive chrome plating technologies, while obtaining high-quality electroplating coatings.

About the Authors

A. N. Kotomchin
Moscow State Automobile and Highway Technical University (MADI)
Russian Federation

Aleksei N. Kotomchin  –  Postgraduate  student of the Production and Repair of Cars and Road Vehicles Department , MADI; Senior Researcher of the Laboratory of the Renovation  of  Machinery and Equipment, T.G. Shevchenko Pridnestrovian State University

125329, Russia, Moscow, 64, Leningradsky Ave.;

3300, Moldova, Tiraspol, 128, 25-go Oktiabria St.

 



A. F. Sinelnikov
Moscow State Automobile and Highway Technical University (MADI)
Russian Federation

Anatoly F. Sinelnikov – Cand. of Sci. (Engineering), Associate    Professor,    Associate    Professor    of the Production and Repair of Cars and Road Vehicles Department

125329, Russia, Moscow, 64, Leningradsky Ave.



References

1. Elinek T.V. Uspehi gal’vanotehniki. Obzor mirovoj special’noj literatury za 2017-2018 gody [World literature review for 2017-2018]. Gal’vanotehnika i obrabotka poverhnosti. 2019; 27 (3): 4-14. (in Russian)

2. Distelrath A., Jakob C. Investigation of structured electrodeposition of hard chromium coatings. Information technology and electrical engineering – devices and systems, materials and technologies for the future. 2009. 379 p.

3. Repenning D. Pulse Chromium Plating. Galvanotechnik. 2000; 91 (10): 2878-2883.

4. Adzhiev, B.U., Vashhenko S.V., Solov’eva Z.A. Vlijanie struktury i fiziko-mehanicheskih svojstv hroma na iznosostojkost’ hromovyh pokrytij [Influence of the structure and physical and mechanical properties of chromium on the wear resistance of chrome coatings]. Gal’vanotehnika i obrabotka poverhnosti. 1992; 1(1): 28-31. (in Russian)

5. Zvjaginceva A.V., Burdykina R.I. Problemy hromirovanija i al’ternativnye pokrytija nikel’ – bor [Problems of chrome plating and alternative Nickel – boron coatings]. Gal’vanotehnika i obrabotka poverhnosti. 2003; 11 (2): 24-29. (in Russian)

6. Dubpernell G, Kenney D. Eigenschaften von Chromueberzuegen aus Chromis-pel-l-Electolyten. Galvanotechnik. 2002; 93 (6): 1466-1469.

7. Kornejchuk N.I., Ljaljakin V.P. Perspektivy ispol’zovanija industrial’nyh metodov vosstanovlenija iznoshennyh detalej mashin gal’vanicheskimi i polimernymi pokrytijami v sovremennyh uslovijah razvitija agropromyshlennogo tehnicheskogo servisa [Prospects for the use of industrial methods for restoring worn machine parts with electroplating and polymer coatings in modern conditions of development of agro industrial technical service]. Trudy GOSNITI. 2018; 130: 254-265. (in Russian)

8. Vashhenko S.V., Solodkova I.N., Kudrjavcev V.N. O nekotoryh fiziko-mehanicheskih svojstvah hromovyh pokrytij, poluchennyh iz hromovokislyh jelektrolitov s organicheskimi dobavkami [About some physical and mechanical properties of chrome coatings obtained from chromic acid electrolytes with organic additives]. Gal’vanotehnika i obrabotka poverhnosti. 2000; 8 (3): 25-28. (in Russian)

9. Kotomchin A.N., Ljahov Ju.G. Analiz jelektrolitov hromirovanija dlja vosstanovlenija i uprochnenija detalej mashin [Analysis of chrome plating electrolytes for restoring and strengthening machine parts]. Vestnik pridnestrovskogo universiteta. serija. 2017. 113-119. (in Russian)

10. Solodkova L.N., Vashhenko S.V., Kudrjavce V.N. Vysokoproizvoditel’nyj jelektrolit iznosostojkogo hromirovanija [High-performance wear-resistant chrome-plated electrolyte]. Gal’vanotehnika i obrabotka poverhnosti. 2003; 11(3): 31-33. (in Russian)

11. Kotomchin A.N., Sinel’nikov A.F. Usovershenstvovanie holodnogo samoregulirujushhegosja jelektrolita hromirovanija pri uprochnenii i vosstanovlenii detalej mashin [Improvement of cold self-regulating electrolyte of chromium plating for hardening and restoration of machine parts]. Mir transporta i tehnologicheskih mashin. 2019; 4 (67): 17-24. (in Russian)

12. Stratulat, M.P. Vosstanovlenie detalej mashin jelektrohimicheskim hromirovaniem [The restoration of details of machines by electrochemical plating]. Orel, OrelGTU, 2009. 246 p. (in Russian)

13. Gubarevich G.P., Moskvicheva G.P., Savchenko A.V. Jekologicheskie pokazateli proizvodstva jelektroosazhdenija hroma i ego splavov na osnove hromovoj kisloty [Environmental indicators of production of electrodeposition of chromium and its alloys based on chromic acid]. VolgGASA. 2003. 31-36. (in Russian)

14. Kotomchin A.N., Sinel’nikov A.F., Kornejchuk N.I. K voprosu vybora sposoba vosstanovlenija detalej mashin [The issue of choosing a method for restoring machine parts]. The Russian Automobile and Highway Industry Journal. 2020; 17(1): 84-97. (in Russian)

15. Maksimenko S.A., Balakina O.A. Jelektroosazhdenie hromovyh pokrytij iz jelektrolitov na osnove hroma (3) i murav’inoj kisloty [Electrodeposition of chromium coatings from electrolytes based on chromium (3) and formic acid]. Gal’vanotehnika i obrabotka poverhnosti. 1992; 1 (3-4): 47-50. (in Russian)

16. Petrochenkova I.V., Pomogaev V.M., Volkovich A.V. Vlijanie uslovij jelektroliza na rasseivajushhuju sposobnost’ jelektrolitov hromirovanija [The influence of electrolysis conditions on the scattering power of chromium plating electrolytes]. Himija i himicheskaja tehnologija. 2009; 52(6): 54-57. (in Russian)

17. Popov E.R., Burykina V.S., Isaenkov E.V. Unos hromovogo angidrida v processe hromirovanija [Entrainment of chromic anhydride in the chrome plating process]. Gal’vanotehnika i obrabotka poverhnosti. 1994. 3 (5-6): 74-76. (in Russian)

18. Petrochenkova I.V., Pomogaev V.M., Volkovich A.V. Osobennosti vlijanija temperatury na rasseivajushhuju sposobnost’ jelektrolitov [Features of temperature influence on the scattering capacity of electrolytes]. Uspehi v himii i himicheskoj tehnologii. 2004; 18: 42-44. (in Russian)

19. Popov E.R., Burykina V.S., Isaenkov E.V. Unos hromovogo angidrida v processe hromirovanija [Entrainment of chromic anhydride in the chrome plating process] Gal’vanotehnika i obrabotka poverhnosti. 1994; 3 (5-6):74-76. (in Russian)

20. Zubchenko V.L. Gibkie avtomatizirovannye gal’vanicheskie linii [Flexible automated galvanic lines]. Moscow, Mashinostroenie, 1989. Pp. 148-156. (in Russian)

21. Chromabscheidung aus wassrigen Losungen. Chromsaurelosungen Galvanotechnik. 2005; 1 (9): 2063-2071.

22. 22. Petrochenkova I.V., Pomogaev V.M., Volkovich A.V. Vlijanie uslovij jelektroliza na rasseivajushhuju sposobnost’ jelektrolitov hromirovanija [The influence of electrolysis conditions on the scattering power of chromium plating electrolytes] Himija i himicheskaja tehnologija. 2009; 52 (6): 54-57. (in Russian)

23. Chromabscheidung aus wassrigen LosungenKatalysatorhaltige Elektrolyte Galvanotechnik. 2005;11 (11): 2619-2628.

24. 24. Baraldi P., Soragni E. On the kinetics of chromium electrodeposition on copper electrodes. J. Alloys and Compounds. 2001; 317-318: 612-618.

25. Demin A.A., Popov E.R. i dr. Malotoksichnyj jelektrolit hromirovanija «DTHI-trihrom» [Low-toxic electrolyte of chromium platin «DTHI-trihrom»]. Tehnologicheskij progress i voprosy jekologii v gal’vanotehnike. 1990. 11-12. (in Russian)

26. Kotomchin A.N., Kornejchuk N.I. Vlijanie uslovij jekspluatacii dorozhno-stroitel’nyh mashin i specializirovannogo avtotransporta na resurs ih uzlov i agregatov [Influence of operating conditions of road construction machines and specialized vehicles on the resource of their components and aggregate]. Tehnicheskij servis mashin. 2019; 2 (135): 135-142. (in Russian


Review

For citations:


Kotomchin A.N., Sinelnikov A.F. Installation for maintaining the operating temperature of electrolytes when restoring machine parts with electroplated coatings. The Russian Automobile and Highway Industry Journal. 2020;17(4):500-511. (In Russ.) https://doi.org/10.26518/2071-7296-2020-17-4-500-511

Views: 897


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2071-7296 (Print)
ISSN 2658-5626 (Online)