CONTROL TECHNIQUE OF LOCAL AND GENERAL STABILITY OF THE LOADING CRANE’S TELESCOPIC BOOM
https://doi.org/10.26518/2071-7296-2019-2-110-121
Abstract
Introduction. The paper examines the overall and local stability of a telescopic boom (TS).
Materials and methods. The author uses methods for analytical research of oscillatory systems with a finite number of degrees and methods of the Deformable Solid Mechanics, such as Material Resistance. Moreover, the author applies Solid Edge Simulation as finite element analysis program based on FEA Femap analysis technology and the NX Nastran solver.
Results. As a result, the author develops a methodology for monitoring the overall and local stability of the vehicle. The usage of the calculation for the overall stability of the vehicle allows to determine the load-height characteristics, parameters of the working equipment that ensure the steady state of the system, and also to track the overall steady state of the vehicle as a function of the vehicle characteristics. In addition, the usage of local stability calculation allows to track the maximum stress state of the vehicle, which is a criterion of local stability and provides the ability to monitor the stability of the most loaded shelves and walls. The proposed method for calculating the stress state takes into account the combined effect of external and local horizontal and vertical loads.
Discussion and conclusions. The usage of methods of monitoring the overall and local stability of the vehicle allows to set automatically the most optimal characteristics of the working equipment, including the developed method in the crane safety system, and to increase the level of safe operation of load- lifting cranes equipped with vehicles.
About the Author
E. A. Potakhov
Emperor Alexander I St. Petersburg State Transport University
Russian Federation
Russian Federation
Potahov Egor Aleksandrovich – Postgraduate Student, Department of Lifting, Track and Construction Machines
190031, St. Petersburg, 9 Moskovsky Ave.
References
1. Tomakov V.I., Tomakov M.V. Sostoyanie promyshlennoj bezopasnosti pri ehkspluatacii gruzopod”yomnyh kranov na ob”ektah, podkontrol’nyh Rostekhnadzoru [State of industrial safety in the operation of cranes at sites controlled by Rostechnadzor]. Izvestiya YUgo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii, 2017; 1 (22): 27–41 (in Russian).
2. Lagerev A.V., Konchic S.V., Blejshmidt L.I. Ocenka riska pri ehkspluatacii samohodnyh gruzopod”emnyh kranov strelovogo tipa v usloviyah nedostatochnoj informacii [Risk assessment in the operation of self-propelled boom cranes with insufficien information]. Nauchno-tekhnicheskij vestnik Bryanskogo gosudarstvennogo universiteta, 2017; 2: 77–94 (in Russian).
3. Wu J., Guzzomi A., Hodkiwicz M. Static stability analysis of non-slewing articulated mobile cranes. Australian Journal of Mechanical Engineering, 2014; 12(1): 66–76.
4. Qian Jb., Bao Lp., Yuan Rb., Yang Xj. Modeling and Analysis of Outrigger Reaction Forces of Hydraulic Mobile Crane. International Journal of Engineering, Transactions B: Applications, 2017; 8 (30): 1246–1252.
5. Mamaev K.M. Matematicheskoe modelirovanie nagruzok avtokrana i vozmozhnost’ rasshireniya ego harakteristik gruzopod”emnosti [Mathematical modeling of truck crane loads and the possibility of expanding its load-carrying characteristics]. Vestnik Dagestanskogo gosudarstvennogo tekhnicheskogo universiteta. Tekhnicheskie nauki, 2011; 4(23): 76–80 (in Russian).
6. Cui Z., JIang W., Cheng L. Analysis and Experimental Verification of the Strength of Telescopic Booms for Construction Machinery. International Journal of Simulation: Systems, Science and Technology, 2016; 33.1–33.10.
7. Ryahin V.A., Grivezirskij YU.V., Gol’din YU.M. Analiz mestnoj nagruzhennosti kranovyh teleskopicheskih strel metodom konechnyh ehlementov [Analysis of the local loading of crane telescopic arrows by the finite element method]. Stroit. i dorozh. Mashiny, 1984; 4: 22–24 (in Russian).
8. Savkovic M., Gasic M., Pavlovic G. Stress analysis in contact zone between the segments of telescopic booms of hydraulic truck cranes. ThinWalled Structure, 2014; 85: 332–340.
9. Fujita H., Sugiyama H. Development of flexible telescopic boom model using absolute nodal coordinate formulation sliding joint constraints with LuGre friction. Theoretical and Applied Mechanics Letters, 2012; 2(6): 063005.
10. Pavlovic A., Fragassa C., Minak G. Buckling analysis of telescopic boom: theoretical and numerical verification of sliding pads. Tehnicki Vjesnik, 2017; 24(3): 729–735.
Review
For citations:
Potakhov E.A. CONTROL TECHNIQUE OF LOCAL AND GENERAL STABILITY OF THE LOADING CRANE’S TELESCOPIC BOOM. The Russian Automobile and Highway Industry Journal. 2019;16(2):110-121. (In Russ.) https://doi.org/10.26518/2071-7296-2019-2-110-121
Views:
550
Email this article 