Preview

The Russian Automobile and Highway Industry Journal

Advanced search

STATISTICAL MODELS OF PHYSIC-MECHANICAL CHARACTERISTICS OF ROADS IN THE AREA OF CULVERTS

https://doi.org/10.26518/2071-7296-2018-4-560-573

Abstract

Introduction. Increased technical requirements for roads, associated with increasing axial loads, the intensity and speed of vehicles, with the actual technical condition of the roads number, engineering structures, including culverts, activation of federal and regional services to bring the parameters of road surfaces to the world standards, all listed parameters pose the task in developing the mathematical modeling methods of physical-mechanical characteristics of soils in the culverts area. Therefore, such methods allow to reduce economic costs and time for carrying out experimental research of deformations based on the monitoring results of the soil roadbed and pavement.

Materials and methods. The order of technical condition of the culverts’ research, pavement and physico-mechanical characteristics of soils, methods of experimental research were discussed in the article. Moreover, the approach to carrying out experimental works on penetration of pits in places of deformations and nearby was approved. Additionally, the evaluation of the soils condition on the roadbed and the annular space of the culverts was made.

Results. The schemes of deformation and elasticity, density, humidity, consistency, plasticity number, fluidity, and physical properties of the soil are determined. The engineering-geological elements, mean values of density, humidity and compaction factor are established according to the research aim. Consequently, the values of the strain modules and the modulus of elasticity are calculated on the basis of compression and stamp tests.

Discussion and conclusions. The dependence of the pavement on the physic-mechanical characteristics of the soil of the roadbed is proved. The correlation-regression analysis of soil characteristics is performed on the basis of experimental research. As a result, the regression equations are obtained in the annular space of culverts and at the distance of ± 30 m nearby. As could be proved, there are irregularities in the coverage of road clothes caused by drawdown in barrier locations. The physic-mechanical characteristics of the ground and strength characteristics are increased by culverts’ transfer on distance. The application of physic-mechanical characteristics of the soil together with experimental studies makes it possible to reduce labor costs, time and cost of testing.

About the Authors

V. S. Vorobyov
Siberian State Transport University
Russian Federation

Valery S. Vorobjev – doctor of technical science, Professor, Dean of the Rail Road Construction Faculty, Head of the Construction Technology, Organization and Economics Department

630049, Novosibirsk, 191,D. Kovalchuk St.



E. L. Karelina
Siberian State Transport University
Russian Federation

Karelina Elena Leonidovna – graduate student of the Construction Technology, Organization and Economics Department 

 

630049, Novosibirsk, 191,D. Kovalchuk St.



O. A. Bender
Siberian State Transport University
Russian Federation

Bender Oxana Anatolievna – candidate technical science, associate professor of the Researches, Design and Construction of Railway and Highways Department

630049, Novosibirsk, 191,D. Kovalchuk St.



K. V. Katalymova
Open Joint Stock Company “NovosibirskAvtoDor
Russian Federation

Katalymova Ksenia Valeryevna – candidate technical science, Director of Legal and Personnel Department 

630099, Novosibirsk, 19, Kamenskaya St.



References

1. Lazarev YU.G., Simonov D.L., Novik A.N. Formirovanie potrebitel’skih i ehkspluatacionnyh svojstv avtomobil’nyh dorog [Formation of consumer and operational properties of highways]. Tekhniko-tekhnologicheskie problemy servisa, 2016, no. 1(35), pp. 43-47. (in Russian).

2. Vorob’ev V.S., Pingasov D.V., Miroshnichenko S.V. Upravlenie riskami stroitel’stva avtomobil’nyh dorog [Risk management of road construction]. Izvestiya vuzov. Stroitel’stvo, 2012, no. 1, pp. 84-91. (in Russian).

3. Bender O.A. Prognozirovanie riskov v sisteme kapital’nogo remonta avtomobil’nyh dorog [Forecasting of risks in system of highways major maintenance]. Vestnik SibADI. Omsk, 2012. no 6(28). pp. 15-18. (in Russian).

4. Uglova E.V., Tiraturyan A.N., SHamraev L.G. Sovremennyj podhod k ocenke transportnoehkspluatacionnyh pokazatelej avtomobil’nyh dorog gosudarstvennoj kompanii «Rossijskie avtomobil’nye dorogi» [A modern approach to assessing the transport and operational performance of highways of the state company “Russian Highways”]. SAPR i GIS avtomobil’nyh dorog, 2016, no. 1(6), pp. 39-51. (in Russian).

5. Daniel J. Findley Part 4 Highway Geometric Design. Highway Engineering. 2016, Pages 167253. https://doi.org/10.1016/B978-0-12-8012482.00004-6

6. Efimenko S.V., Efimenko V.N., Badina M.V. Sovershenstvovanie norm proektirovaniya dorozhnykh odezhd v chasti utochneniya dislokatsii dorozhno-klimaticheskikh zon dlya sub”ektov Rossiyskoy Federatsii [Improvement of pavement design standards in terms of roadbuilding climatic zoning for subjects of the Russian Federation]. Mir dorog, 2014, no. 74, pp. 21–23. (in Russian).

7. Efimenko S.V., Efimenko V.N., Sukhorukov A.V. Sovershenstvovanie norm proektirovaniya avtomobil’nykh dorog Rossiyskoy Federatsii v chasti metodologii ucheta osobennostey prirodnoklimaticheskikh usloviy [Improving highway design standards of the Russian Federation accounting for natural-climatic conditions]. Vestnik KSUCTA, 2016, no. 1, pp. 53–59. (in Russian).

8. Zapata C.E., Houston W.N. Calibration and validation of the enhanced integrated climatic model for pavement design – Washington, D.C.: Transportation Research Board, 2008. 62 p.

9. Krickij M.YA., SHestakov V.N. O klassifikacii defektov zemlyanogo polotna avtomobil’nyh dorog [About classification of defects of a road bed of highways]. Vestnik SibADI, 2007, no 5, pp. 69–76. (in Russian).

10. Nikolenko, D.A., Kmeta A.G. Prognozirovanie deformacij i razrushenij dorozhnyh konstrukcij avtomobil’nyh dorog: nauchnoe izdanie [Forecasting deformations and fractures of road structures of highways: a scientific publication]. Stroitel’stvo, Rostov na Donu, 2014, pp. 35-36. (in Russian).

11. Vorob’ev V.S., Pak E.L. Vliyanie fizikomekhanicheskih harakteristik grunta zemlyanogo polotna na obrazovanie deformacij dorozhnoj odezhdy [Influence of physicomechanical characteristics of ground of an earthen cloth on the formation of deformations of pavemen]. Vestnik TGASU, Tomsk, 2017, no. 1 (60), pp. 190-199. (in Russian).

12. Aleksandrova N.P., Semenova T.V., Strigun K.YU. Sovershenstvovanie metodov ehkspress ocenki kachestva uplotneniya gruntov zemlyanogo polotna stroitel’stva avtomobil’nyh dorog [Improvement of the methods of express assessment of the quality of compaction of soil in the roadway of road construction]. Vestnik SibADI, 2015, no 4(44), pp. 46-57. (in Russian).

13. Tosti F., Benedetto A., Ciampoli L.B., Lambot S., Patriarca C., Slob E.C. GPR analysis of clayey soil behaviour in unsaturated conditions for pavement engineering and geoscience applications. Near surface geophysics, 2016. Т.: 14, в 2, pp. 127–144.

14. Lavrent’ev P.A. Otechestvennye i zarubezhnye metodologii prognozirovaniya prodol’noj rovnosti pokrytiya avtomobil’nyh dorog [Domestic and foreign methodologies for predicting the longitudinal smoothness of the road surface coverage]. Vestnik grazhdanskih inzhenerov, 2013, no. 4(39), pp. 168-172. (in Russian).

15. SHustov, A.V., Ganzin S.V., Samek E.I. Ocenka primenyaemyh metodov diagnostiki rovnosti pokrytiya avtomobil’nyh dorog pri ih ehkspluatacii [Estimation of applied methods of diagnostics of smoothness of a covering of highways at their operation]. Izvestiya VolgGTU, 2013, no. 21(124), pp. 100-103. (in Russian).

16. Afinogenov O.P., Afinogenov A.O., Seryakova A.A. Vliyanie stepeni uplotneniya gruntov na velichinu ih modulya uprugosti [Influence of the degree of compaction of soils on the magnitude of their modulus of elasticity]. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta, 2014, no. 3(103), pp.110-113. (in Russian).

17. YArmolinskij, A.I., YArmolinskij V.A., Ukrainskij I.S. Analiz deformacii i razrushenij avtomobil’nyh dorog yuga Dal’nego Vostoka i predposylki ih ustraneniya [Analysis of deformation and destruction of highways in the South of the Far East and the prerequisites for their elimination] Dal’nij Vostok. Avtomobil’nye dorogi i bezopasnost’ dvizheniya: mezhdunarodnyj sbornik nauchnyh trudov Habarovsk: Izdatel’stvo TOGU, 2014, no. 14, pp. 20-28. (in Russian).

18. Uglova E.V., Tiraturyan A.N., Liapin A.A. Integrated approach to studying characteristics of dynamic deformation on flexible pavement surface using nondestructive testing. PNRPU Mechanics Bulletin, 2016, no 2, рр. 111–130. DOI: 10.15593/perm.mech/2016.2.08. (in Russian).

19. Semenova T.V., Kuzin N.V. Vliyanie vlazhnosti i stepeni uplotneniya grunta zemlyanogo polotna na parametry prochnosti i deformiruemosti [Influence of humidity and the degree of soil compaction of the roadbed on the parameters of strength and deformability]. Nauchnyj al’manah, 2016, no. 7-1(21), pp. 451-453. (in Russian).

20. Qiao Y., Flintscli G., Dawson A., Parry T. Examining Effects of Climatic Factors on Flexible Pavement Performance and Service Life Transportation Research Record: Journal of the Transportation Research Board. 2013. no. 2349. pp. 100-107.

21. Mogil’nyj K.V., CHvanov V.V., Krasikov O.A. Trebovaniya k rovnosti dorozhnyh osnovanij i pokrytij. Metody i sredstva izmerenij nerovnostej [Requirements for the smoothness of road bases and coatings. Methods and means for measuring irregularities]. Dorogi i mosty, 2011, Vol. 26, no 2, pp. 151-169. (in Russian).


Review

For citations:


Vorobyov V.S., Karelina E.L., Bender O.A., Katalymova K.V. STATISTICAL MODELS OF PHYSIC-MECHANICAL CHARACTERISTICS OF ROADS IN THE AREA OF CULVERTS. The Russian Automobile and Highway Industry Journal. 2018;15(4):560-573. (In Russ.) https://doi.org/10.26518/2071-7296-2018-4-560-573

Views: 749


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2071-7296 (Print)
ISSN 2658-5626 (Online)