RESISTANT POLYMER NANOCOMPOSITES’ DEVELOPMENT AND INVESTIGATION

Introduction. The advanced technology development demands higher requirements to the physicomechanical characteristics of the polymer composite materials (PCM) widely used in general and special purpose products such as in transport and road-building. This determines the relevance and significance of the new polymer nanocomposites development on the tribotechnical purpose with high physic-mechanical and tribotechnical characteristics.

Materials and methods. The problem mentioned above is solved by means of the structural modification’s methods of the PCM polymer matrix and the technological process optimization of the composite materials’ synthesis. One of the structural modification advanced methods is the polymer matrix charging with different fillers’ types, particularly, disperse and fiber ones, and in recent years – ultradispersed and nanodimensional fillers.

 Results. The composite materials with nanodispersed fillers feature the properties significantly different from those of the materials with microand macrodispersed particles because of the high surface activity of nanodimensional particles’ fillers.

 Discussion and conclusion. The research deals with the development results and polymer nanocomposites’ investigation with polydispersed and nanodimensional fillers, their influence upon the structure and wear-resistance of the polymer composite materials based on polytetrafluorethylene.

1. Mashkov Yu.K. Kompozicionnye materialy na osnove politetraftoretilena [Composite materials based on polytetrafluoroethylene. Structural modification]. Strukturnaya modifikaciya. Moscow, Mashinostroenie, 2005. 240 p.

2. Aderikha V. N., Shapovalov V. A. Effect of filler surface properties on structure, mechanical and tribological behavior of PTFE-carbon black composites. Wear. 2010. no. 268. pp. 1455 – 1464.

3. Aderikha V.N. Prochnostnye svojstva, struktura i iznosostoikost’ kompozitov PTFE-tehnicheskij uglerod [Strength properties, structure and wear resistance of PTFEcarbon composites]. Trenie i iznos, 2008. Vol. 29, no. 2. pp. 160 – 168.

4. Shi Y. The effect of surface modification on the friction and wear behavior of carbon nanofiber-filled PTFE composites. Wear. 2008. no. 264. pp. 934 – 939.

5. Vail J.R., Burris D.L., Sawyer W.G. Multifunctionality of single-walled carbon nanotube-polytetrafluoroethylene nanocomposites. Wear. 2009. no. 267. pp. 619 – 624.

6. Ginzburg B.M. Tribologicheskie svojstva kompozitov polytetrafluoroethylene – fullerenovaya sazha [Tribological properties of polytetrafluoroethylene-fullerene black composite]. Vysokomolekulyarnye soedineniya. Ser. A., 2008. Vol. 50, no. 8, pp. 1483 – 1492.

7. Tkachev A.G., Zolotuhin I.V. Apparatura i metody sinteza tverdotel’nyh nanostruktur [Equipment and methods for the synthesis of solid-state nanostructures: monograph]. Moscow, Mashinostroenie-1, 2007. 316 p.

8. Mashkov Yu.K. Ovchar Z.N., Surikov V.I. Kompozicionnye materialy na osnove politetraftoretilena [Composite materials based on polytetrafluoroethylene. Structural modification]. Moscow, Mashinostroenie, 2005. 200 p.

9. Mashkov Yu.K., Kropotin O.V. Tribofizika i strukturnaya modifikaciya materialov tribosystem [Tribophysics and structural modification of tribosystem materials]. Omsk, 2009. 324 p.

10. Surikov V.I. Povyshenie expluatacionnyh svojstv kompozitov na osnove politetraftoretilena putem strukturnoj mnogourovnevoj modifikacii. Doct, Diss. [Increase of operational properties of composites on the basis of polytetrafluoroethylene by structural multilevel modification. Doct. Diss.]. Omsk, 2001. 363 p.

11. Andrianova O.A. Modificirovannye polimernye i elastomernye tribotehnicheskie materialy dlya tehniki Severa. Doct, Diss. [Modified polymeric and elastomeric tribotechnical materials for engineering of the North. Doct. Diss.]. M, 2000. 337 p.

12. Mihajlin Yu.A. Termoustojchivye polimery i polimernye materialy [Thermally stable polymers and polymer materials]. St. Petersburg, Professiya, 2006. 624 p.

13. Mashkov Yu.K., Ovchar Z.N., Bajbarackaya M.Yu., Mamaev O.A. Polimernye kompozicionnye materialy v tribotehnike [Polymer composites in tribotechnics]. Moscow, Nedra, 2004. 262 p.

14. Egorova V.A. Povyshenie effektivnosti strukturnoj modifikacii politetraftoretilena skrytokristallicheskim grafitom putem ogranicheniya teplovogo rasshireniya pri spekanii. Doct, Diss. [Increase of efficiency of structural modification of polytetrafluoroethylene by cryptocrystalline graphite by limiting thermal expansion during sintering. Doct. Diss.]. Omsk, 2008. 156 p.

15. Kurguzova O.A. Razrabotka iznosostoikogo nanokompozita na osnove politetraftoretilena s cel’yu povysheniya rabotosposobnosti i dolgovecynosti metallopolimernyh germetiziruyushhih ustrojstv. Doct, Diss. [Development of a wear-resistant nanocomposite based on polytetrafluoroethylene in order to improve the operability and durability of metalpolymer sealing devices. Doct. Diss.]. Omsk, 2014. 107 p.

16. Mashkov Yu.K., Poleshhenko K.N., Povoroznyuk S.N., Orlov P.V. Trenie i modificirovannye materialov tribosystem [Friction and modification of tribosystem materials]. Moscow, Nauka, 2000. 337 p.

17. Stan F., Fetecau C. Study of stress relaxation in polyteyrafluoroethylene composites by cylindrical macroindentation. Composites. 2013, no. 47, Part B, pp. 298 – 307.

18. Mashkov Yu.K., Negrov D.A., Ovchar Z.N., Zyablikov. Uluchshenie mehanicheskih i tribotehnicheskih svojstv kompozicionnyh materialov s ispol’zovaniem energii ul’trazvukovyh kolebanij [Improvement of mechanical and tribotechnical properties of polymeric composite materials using ultrasonic vibration energy]. Trenie i iznos. 2006. Vol. 27, no. 3, pp. 313 – 317.

19. Kropotin O.V. Iznosostoikost’ PTFE-compositov dlya povysheniya nadezhnosti metallopolimernyh germetiziruyushhih ustrojstv izdelij mashinostroeniya. avtoref. Doct, Diss. [Wear resistance of PTFE composites for increasing the reliability of metal-polymer sealing devices of engineering products. Doct. Diss.]. Omsk, OmGTU. 2016. 34 p.

20. Kropotin O.V., Mashkov Yu.K., Egorova V.A., Kurguzova O.A. Vliyanie uglerodnyh modifikatorov na strukturu i iznosostoikost’ polimernyh nanokompozitov na osnove politetraftoretilena [Effect of carbon modifiers on the structure and wear resistance of polymeric nanocomposites based on polytetrafluoroethylene]. Zhurnal tehnicheskoj fiziki, 2014, Vol. 84, no. 5. pp. 66 – 70.

21. Mashkov Yu.K., Kropotin O.V., Shil’ko V.A., Egorova V.A., Chemisenko O.V. Formirovanie struktury i svojstv antifrikcionnyh compositov modifikacij politetraftoretilena polidispersnymi napolnitelyami [Formation of the structure and properties of antifriction composites of modifications of polytetrafluoroethylene with polydisperse fillers]. Materialovedenie. 2015, no. 1, pp. 22 – 25.

22. Markov A.V., Vlasov S.V. Principy vybora polimernyh materialov dlya izgotovleniya izdelij [Principles of choosing polymeric materials for the manufacture of products]. Polimernye materialy. izdeliya. Oborudovanie. Tehnologii.2004, no. 6 – 8, pp. 17 – 29.

23. Mashkov Yu.K., Kropotin O.V., Kurguzova O.A. Sozdanie polimernogo antifrikcionnogo nanokompozita na osnove politetraftoretilena s povyshennoj iznosostoikost’yu [Creation of a polymeric antifriction nanocomposite based on polytetrafluoroethylene with increased wear resistance]. Omskij nauchnyj vestnik, 2013, no. 2 (120), pp. 86 – 89.

24. Mashkov Yu.K., Kurguzova O.A., Klimenko S.V. Issledovanie polimernogo nanokompozita dlya uzlov treniya [Investigation of polymer nanocomposite for friction units]. Vestnik Sibirskogo otdeleniya Akademii voennyh nauk, 2017, no. 46, pp. 53 – 56.

25. Mashkov Yu.K., Kropotin O.V., Kurguzova O.A. Antifrikcionnyj polimernyj kompozicionnyj material [Antifriction polymeric composite material]. Patent RF, no. 2012146766/05. 2014. 3 p.

26. Mashkov Yu.K., Kropotin O.V., Egorova V.A., Kurguzova O.A. Sposob izgotovleniya iz polimernyh kompozicionnyh materialov na osnove politetraftoretilena i ustrojstvo dlya izgotovleniya izdelij [Method of manufacturing from polymeric composite materials based on polytetrafluoroethylene and a device for manufacturing articles]. Patent RF, no. 2013125074/05; 2015. 3 p.