DECREASE IN ABRASIVE WEAR OF ELEMENTS OF MILLS OF SHOCK AND INTEGRATED ACTION WITH USE OF SOLID BEZVOLFRAMOVY TIC-TINI ALLOYS
https://doi.org/10.26518/2071-7296-2017-2(54)-48-52
Abstract
In this work receiving composite materials on the basis of refractory connection – transitional alloy from a nikelid of the titan is considered. TiNi alloy has the high level of damping. Use of this binding material allows to increase significantly heat resistance, durability, plasticity and by that abrasive wear resistance the dezintegratornykh of installations in use beat. For conditions of road construction by the most suitable superthin crushing of mix as the most productive and less power- intensive process is. The izmelchitelnykh of installations is the advantage of this type their comparative compactness.
About the Authors
V. V. AkimovRussian Federation
Doctor of Engineering, professor of “Cars, Constructional Materials and Technologies” department
644080, Omsk, Mira Ave., 5
A. I. Gromovik
Russian Federation
Candidate of Technical Sciences, the associate professor “Construction mechanics and geotechnologies”
644080, Omsk, Mira Ave., 5
A. Yu. Grjaznov
Russian Federation
engineer of “Cars, Constructional Materials and Technologies” department
644080, Omsk, Mira Ave., 5
References
1. V.S. Prokopets, V.V. Akimov. Increase in operability of mills of shock action with application of the raised heat resistance. Bashkir chemical magazine, 2005, T.12, No. 3, рр. 81-83.
2. Haynike G. Tribokhimiya, M.: World, 1987, 584 pages.
3. Molchanov V.I., Seleznyov O.G., Zhirnov E.N. Activation of minerals when crushing, M.: Not Wad Dra, 1988, 208 pages.
4. Kragelsky I. V. Friction and wear. M.: Iashinostroyeniye, 1968, 480 pages.
5. Claims I.R., Udemyys H. H. Iznosostoykost of elements of grinders of shock action. M.: Mechanical engineering, 1986, 160 pages.
6. Andrievsky, R.A. Nanocomposites on the basis of refractory connections: condition of developments and prospect. Materials science, 2006, No. 4, pp. 20-26.
7. V.S. Panov, A.A. Zaytsev. The solid WC-Co alloys alloyed by tantalum carbide. Obzor. Powder metallurgy and functional coverings, 2015, No. 2, рр. 44-48.
8. S.S. Ordanyan, I.B. Panteleev, T.V. Lukashova. Heat resistance and thermal stability of the alloyed solid WC-Co-Ni-RE (MN) alloys. Powder metallurgy and functional coverings, 2010, No. 2, рр. 23-25.
9. Akimov, V.V. Mekhanizm of liquid-phase agglomeration of hard-alloy composites of TIS-TiNi. News of higher educational institutions. Ferrous metallurgy, 2006, No. 6, рр. 33-35.
10. V. V. Akimov, A. F. Mishurov, E. V. Akimova. Zharostoykost the bezvolframovykh of solid TiC-TiNi alloys depending on volume structure of composition when heating to high temperatures. News of higher educational institutions. Ferrous metallurgy, 2016, T.59, No. 10, рр. 688-691.
11. Geller Yu. A. Instrumental became, M:metallurgiya, 1975, 580 pages.
12. Popov A.YU., Vasilyev N. G., A.A. Rauba. Thermomechanical hardening of the hard- alloy plates used for turning of wheel couples. Zhelezhnodorozhny transport of Siberia: problems and prospects: Those. report academic and research conference, Omsk, 1989, Page 83.
Review
For citations:
Akimov V.V., Gromovik A.I., Grjaznov A.Yu. DECREASE IN ABRASIVE WEAR OF ELEMENTS OF MILLS OF SHOCK AND INTEGRATED ACTION WITH USE OF SOLID BEZVOLFRAMOVY TIC-TINI ALLOYS. The Russian Automobile and Highway Industry Journal. 2017;(2(54)):48-52. (In Russ.) https://doi.org/10.26518/2071-7296-2017-2(54)-48-52