Preview

The Russian Automobile and Highway Industry Journal

Advanced search

Экспериментальные исследования процесса копания грунтов роторно-дисковыми рабочими органами под гидростатическим давлением

Abstract

As a result of experimental studies the obtained regularities of influence of hydrostatic pressure on the process of soil digging knives of a rotary disk of the working body. It is found that for cohesive soils, the resistance to digging of the soil by the knives of a rotary disk of the working body increases with increasing values of the hydrostatic pressure (the depth of immersion of the working body). The design of stand of physical modeling to study the process of soil digging knives of a rotary disk of the working body under hydrostatic pressure. The depth of immersion of the working body in a liquid was simulated by the creation of a corresponding hydrostatic pressure in the hermetic housing of the stand. Based on strain records obtained values of the tangential component of the effort of digging the soil and values of traction resistance of digging trenches under hydrostatic pressure.

About the Authors

Rakhimzhan Abylkasymovich Kabashev
Kazakh Automobile and Road Academy im.L.B. Goncharova
Russian Federation


Sanzharbek Jenishbekovich Turgumbaev
Kyrgyz State Technical University. I. Razzakova
Russian Federation


References

1. Вильман, Ю.А. Технология строительных процессов и взведения зданий. Современные и прогрессивные методы / Ю.А. Вильман - М.: Издательство АСВ, 2014. - 336 с.

2. Кадыров, А.С. Определение сил сопротивления движению рабочего инструмента фрезерной землеройной машины в глинистом растворе / А.С. Кадыров, А.С. Нурмаганбетов // Строительные и дорожные машины. - 2012. - № 2. - С. 47-52.

3. Добрецов, В.Б. Мировой океан и континентальные водоемы: минеральные ресурсы, освоение, экология / В.Б. Добрецов, В.А. Рогалев, Д.С. Опрышко. - СПб.: Международная академия наук экологии, безопасности человека и природы. - 2007. - 796 с.

4. Small Scale Dredging. - Boston: Lincolnshire, UK, 2014. - 21 p.

5. Beindorff R. Calculations on Forces and Velocities of a Submarine Narrow Trench in Sandy Soil / R.Beindorff, S.Miedema, L.Baalen // Terra et Aqua. - 2012. - No 126, - P. 13-24.

6. Setiwan R. Parametric Analysis on Off-shore Dredging Process using Cutter Suction Dredgers / R.Setiwan // ACEAN Engineering Journal. - 2015. - Part A, Vol. 6, No 1- P. 37-46.

7. Недорезов, И.А. Влияние гидростатического давления на работу траншеекопателей при строительстве способом «стена в грунте» / И.А. Недорезов, Д.И. Федоров, Ж.Ж. Тургумбаев // Транспортное строительство. - 1979. - № 7. - С. 47-48.

8. Авторское свидетельство 1700159 (СССР), МПК Е 02 F 3/92. Стенд для подводного резания грунтов / Д.Д. Тургумбаев, И.А. Недорезов, Н.Р. Нурманбетов, К. Исаков; Бишкекский политехнический институт (SU); № 4717351/03; заявл. 11.06.1989; опубл. 23.12.1991. Бюл. № 47. 3 с.


Review

For citations:


Kabashev R.A., Turgumbaev S.J. . The Russian Automobile and Highway Industry Journal. 2016;(4(50)):23-28. (In Russ.)

Views: 710


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2071-7296 (Print)
ISSN 2658-5626 (Online)