JUSTIFICATION OF WIDTH OF THE TAPE OF THE MILL OF THE FEEDER MILLING-ROTORY SNOW BLOWER
https://doi.org/10.26518/2071-7296-2017-2(54)-7-11
Abstract
In article the question of influence of number of calling of a mill of a feeder of a millingrotary snow blower on volume of the cut-out snow prism is considered. Also the equation of definition of dependence of width of a tape of a mill on a mill angle of rotation has been received. Results of calculations of change of width of a tape of a mill and change of the transported volume of a snow prism on schedules are presented. Images of mills with a width of the tape providing compliance to height of the figure limiting the cut-out volume of snow weight are submitted.
About the Authors
D. S. Aleshkov
The Siberian State Automobile and Highway University (SibADi)
Russian Federation
Russian Federation
candidate technical science, head of the department Technosphere safety
(644080, Mira, 5 prospect, Omsk, Russian Federation)
N. Y. Ayupova
The Siberian State Automobile and Highway University (SibADi)
Russian Federation
Russian Federation
educational master of the Technosphere safety department
(644080, Mira, 5 prospect, Omsk, Russian Federation)
References
1. Kireev, V. I. Chislennye metody v primerah i zadachah : ucheb. posobie / V. I. Kireev, A. V. Panteleev. – M. : Vysshaya shkola, 2004. – 480 s. : il.
2. SHup, T. E. Prikladnye chislennye metody v fizike i tekhnike: per. s angl. / T. E. SHup. – M. : Vysshaya shkola, 1990. – 255 s. : il., tabl.
3. Ivanov A.I., Mishin V.A. Snegoochistiteli otbrasyvayushchego dejstviya. – M.: Mashinostroenie, 1981. – 159 s.: il.
4. Piskunov N. S. Differencial’noe i integral’noe ischisleniya : ucheb. dlya vtuzov v 2-h t. T. 1: – M.: Integral-Press, 2006. – 2006. – 415 s.: ris., tabl.
5. Spravochnik po matematike dlya nauchnyh rabotnikov i inzhenerov. Opredeleniya, teoremy, formuly : per. s angl. / G. Korn, T. Korn ; Pod red. I.G. Aramanovicha. – M. : Nauka, 1973. – 832 s.
6. Mashiny dlya soderzhaniya i remonta gorodskih i avtomobil’nyh dorog : uchebnoe posobie dlya vuzov / V. I.Balovnev i dr. – 2-e izd., dop. i pererab. – M. ; Omsk : Omskij dom pechati, 2005. – 768 s. : il.
7. SHalman, D. A. Snegoochistiteli / D. A. SHalman. – 2-e izd., pererab. – L. : Mashinostroenie, 1973. – 216 c. : il.
8. Aleshkov D.S. Vliyanie osnovnyh parametrov frezerno-rotornogo snegoochistitelya na vyrezaemyj ob”em snezhnoj struzhki / N.Y. Urusova // Vestnik SibADI, 2013. – № 5(33). – S. 10-14.
Review
For citations:
Aleshkov D.S., Ayupova N.Y. JUSTIFICATION OF WIDTH OF THE TAPE OF THE MILL OF THE FEEDER MILLING-ROTORY SNOW BLOWER. The Russian Automobile and Highway Industry Journal. 2017;(2(54)):7-11. (In Russ.) https://doi.org/10.26518/2071-7296-2017-2(54)-7-11
Views:
647
Email this article 