Research results of resonant vibration equipment for compaction of concrete mixtures on a physical model
https://doi.org/10.26518/2071-7296-2024-21-3-366-375
EDN: GPTMAY
Abstract
Introduction. The purpose of this article is to confirm the results of research on resonant vibration equipment for compacting concrete mixtures obtained using a mathematical model. The object of research is an oscillatory system of resonant vibration equipment consisting of two masses interconnected by elastic and dissipative elements. In addition, the first mass is connected to a fixed base through elastic and dissipative elements.
Materials and methods. The main provisions of the theory of similarity and statistical processing of experimental data are used in the research. The required number of repeated experiments was determined statistically, and the reproducibility of the experiment was verified by the Cochran criterion. Results. The criteria and indicators of similarity of processes occurring in the system of resonant vibration equipment have been developed, formulas for the transition from the parameters of nature to the parameters of the physical model have been proposed. The technical characteristics of the physical model are presented.
During the experiment, oscillograms of the movements of the vibrator and the working body which are shifted relative to each other by an angle of π/2 were obtained. At the same time, the amplitude of vibrations of the vibrator significantly exceeds the amplitude of vibrations of the working body.
Discussions and conclusions. The presented dependences of the amplitudes obtained on mathematical and physical models qualitatively repeat each other. In the studied frequency range of the driving force, the maximum error is 12%. This confirms the results obtained on the mathematical model of resonant vibration equipment.
About the Authors
V. G. Zedgenizov
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Viktor G. Zedgenizov – Dr. of Sci., Professor, Professor of the Construction, Road Machines and Hydraulic Systems Department
664074, Irkutsk, 83 Lermontova str.
S. Kh. Faizov
Irkutsk National Research Technical University
Russian Federation
Russian Federation
Sorbon Kh. Faizov – Postgraduate student of the of Construction, Road Machines and Hydraulic Systems Department
664074, Irkutsk, 83 Lermontova str.
References
1. Novoseltsev V.N. Advantages and disadvantages of mathematical modeling. Fundamental Research. 2004; 6: 121–122. (in Russ.)
2. Zedgenizov V.G., Fayzov S.H. Influence of the main parameters of a dual-mass oscillation system on its dynamic characteristics. iPolytech Journal. 2022; 26(2): 164–172. (In Russ.) https://doi.org/10.21285/1814-3520-2022-2-164-172
3. Zedgenizov V.G., Faizov S.Kh. Type series of resonant vibration equipment for concrete mixtures compaction and its main parameters calculation method. The Russian Automobile and Highway Industry Journal. 2023; 20(5): 540–547. (In Russ.) https://doi.org/10.26518/2071-7296-2023-20-5-540-547. EDN: CHGYRA
4. Zedgenizov V.G., Faizov S.Kh. Impact of force application point in two-mass oscillation system on its energy efficiency. The Russian Automobile and Highway Industry Journal. 2023; 20(1): 12–23. (In Russ.) https://doi.org/10.26518/2071-7296-2023-20-1-12-23
5. Saitov V.I., Chuprov V.V. Criteria for the similarity of the process of crushing rocks by a non-free blow. Mining informational and analytical bulletin. 2006; 3: 351–353. (in Russ.)
6. Turgunbaev M.S. Criteria for the similarity of the process of destruction of soil containing clasticstone inclusions. Izvestiya VUZov Kyrgyzstana. 2016; 11-1: 47–51. (in Russ.)
7. Saitov, V. I. Conditions for the similarity of rock destruction processes during crushing. Izv. University. 1986; 10: 59–63. (in Russ.)
8. Soboleva N.S., Efremov A.K. On the similarity of processes during elastoplastic impact. Masinostroenie i kompʹuternye tehnologii. 2019; 2: 1–12. (in Russ.)
9. Fedorenko I.Ya., Pirozhkov D.N. Similarity criteria of hydrodynamic models of a vibrating boiling layer of bulk material. Vestnik Altajskogo gosudarstvennogo agrarnogo universiteta. 2005; 1(17): 105–108. (in Russ.)
10. Pirozhkov D.N. Similarity criteria in the dynamics of the vibrating boiling layer. Vestnik Altajskogo gosudarstvennogo agrarnogo universiteta. 2003; 4(12): 100–103. (in Russ.)
11. Nedostup A.A. Criteria and scales of dynamic similarity of physical processes of fishing. Izvestija KGTU. 2013; 28: 227–235.
12. Kozlov I.V., Peverenko S.N. Criteria of similarity of vane pumps. Vestnik Permskogo universiteta. Fizika. 2019; 3: 5–11. (in Russ.)
13. Saitov V.I. Conditions of similarity of processes of rock destruction during crushing and grinding. Mining Equipment and Electromechanics. 2015; 1(110): 25–28. (in Russ.)
14. Tyukalov D.E., Danilov A.M. Formation of criteria for dynamic similarity of a model to a real object. Molodoj uchenyj. 2015; 4(84): 278–280. (in Russ.) 15. Neshev S.S., Molchanov V.F., Salnikov A.F. Application of the theory of similarity in the design of RDTT. PNRPU Aerospace Engineering Bulletin. 2012; 33: 66–76. (in Russ.)
15. Koshkin S.V., Sokolov A.L. Processing and analysis of experimental results and hypothesis testing. Special’naja tehnika i tehnologii transporta. 2020; 5: 280–285. (in Russ.)
Review
For citations:
Zedgenizov V.G., Faizov S.Kh. Research results of resonant vibration equipment for compaction of concrete mixtures on a physical model. The Russian Automobile and Highway Industry Journal. 2024;21(3):366-375. (In Russ.) https://doi.org/10.26518/2071-7296-2024-21-3-366-375. EDN: GPTMAY
Views:
221
Email this article 