Technical operation factors influence on bus body durability
https://doi.org/10.26518/2071-7296-2024-21-1-108-118
EDN: FYUUWV
Abstract
Introduction. The purpose of the work is to study the causes of corrosion destruction of bus bodies of the enterprise. In the course of work, it was revealed that the main causes of intensive corrosion destruction of bus bodies are insufficiently high corrosion resistance of metals used in the manufacture of the body frame. The main places of occurrence of foci of corrosion of the body are: wheel arches; rear and lower parts of the bus, which are more susceptible to adverse road conditions; the upper and lower parts of the window openings in case of violation of the tightness of the seal. In the course of the study, initial data were obtained to determine the conditions and factors determining condensation on the cooled surfaces of bus bodies entering the indoor parking area; a set of organizational and technical measures aimed at reducing the intensity of corrosion wear of the company’s vehicle bodies was developed.
Materials and methods. The results of observations of changes in the technical condition of bus bodies, parameters of their maintenance conditions were used, methods of a priori ranking of factors and classification were used. The results and recommendations on the technical operation of bus bodies are described.
Results. As intermediate results of the conducted research, the data on the influence of the technical condition of bus bodies on the indicators of technical operation were obtained, which make it possible to justify the modes of maintenance and storage of motor vehicles. The data obtained make it possible to simulate the processes affecting the technical condition of bus bodies, which is the basis for the development of optimization measures.
Discussion. It is noted that the approach implemented during the study enables to establish a set of factors affecting the technical condition of bus bodies, and to determine the consequences of premature achievement of the limit state by the elements of the load-bearing structure.
Conclusion. As a generalizing conclusion, it is noted that the practical implementation of the developed methodology ensures the development and implementation of sound measures to increase their durability in the practical activities of road transport enterprises.
Keywords
About the Authors
A. N. MelnikovRussian Federation
Aleksey N. Melnikov – Cand. of Sci., Associate Professor departments of technical operation and repair of cars.
13 Pobedy Ave., Orenburg, bldg. 3, 460018
S. V. Gorbachev
Russian Federation
Sergey V. Gorbachev – Cand. of Sci., Associate Professor departments of economic theory, regional and sectoral economics.
13 Pobedy Ave., Orenburg, bldg. 3, 460018
E. G. Keyan
Russian Federation
Ervand G. Keyan – Cand. of Sci., Associate Professor departments of economic theory, regional and sectoral economics.
13 Pobedy Ave., Orenburg, bldg. 3, 460018
R. S. Faskiev
Russian Federation
Rif S. Faskiev – Candidate of Technical Sciences, Associate Professor departments of economic theory, regional and sectoral economics.
13 Pobedy Ave., Orenburg, bldg. 3, 460018
References
1. Orlov L.N. Rogov P.S. Tumasov A.V. Vashurin A.S. Increasing of the passive safety of the bus bodies constructions. Modern problems of science and education. 2014; 3:17-17.
2. Korta J., Uhl T. Multi-material design optimization of a bus body structure. Journal of KONES Powertrain and Transport. 2013; Vol. 20, No. 1: 139-146.
3. Meshherinov N. A., Nugaeva V. O. Methods of protection of the body of the car against corrosion. Tehnicheskoe regulirovanie v transportnom stroitel’stve. 2019; 2(35):159-162. EDN XWIKCV. (in Russ.)
4. Sufijanov R. Sh. To the question of corrosion of passenger car bodies. Tendencii razvitija nauki i obrazovanija. 2023; 93-8: 23-26. DOI: 10.18411/trnio-01-2023-387. EDN ATPSCB. (in Russ.)
5. Shemyakin A.V. Fadeev I.V., Uspensky I.A., Yukhin I.A., Sadetdinov SH.V. New corrosion inhibitor in the composition of paint and varnish coatings for car bodies. Herald of ryazan state agrotechnological university Named after P.A. Kostychev. 2023; T. 15, № 2: 168-175. DOI: 10.36508/RSATU.2023.67.31.023. EDN HNSCSM. (in Russ.)
6. Sazonov D. S., Erzamaev M. P., Zhil’cov S. N., Bychenin A. P. Effect of anti-corrosion inhibitors on protection performance of auto body elements. Izvestija Samarskoj gosudarstvennoj sel’skohozjajstvennoj akademii. 2020; 1: 29-36. EDN PKEBZF. (in Russ.)
7. Fadeev I. V. Influence of road pollution components for water absorption of anti-corrosive film. Herald of ryazan state agrotechnological university Named after P.A. Kostychev. 2021; 1(49): 177-183. DOI: 10.36508/RSATU.2021.49.1.026. EDN QEXAHN. (in Russ.)
8. Panasyugin A.S., Kulinich I.L., Masherova N.P., Tsyganov A.R., Kurilo I.I., Pavlovskiy N.D. The usage of organic solvents in paint systems used in high-quality processing of car bodies in the period from 1998 to 2020 Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY). 2022;(1):96-105. (In Russ.) https://doi.org/10.21122/1683-6065-2022-1-96-105
9. Zorina I. O., Dorohin S. V. Increased resource of car body. Al’ternativnye istochniki energii v transportno-tekhnologicheskom komplekse: problemy i perspektivy racional’nogo ispol’zovaniya. 2016; T. 3, no 1(4): 75-79. DOI: 10.12737/18835. EDN XRKFOP. (In Russ.)
10. Ovchinnikov N. A., Kalmikov B. Y., Stradanchenko S. G., Kozyreva E. A., Chefranova O. V. The engineering method of calculation of the remaining life of the bus body safe operation on the basis of estimation of its corrosion deterioration. ARPN Journal of Engineering and Applied Sciences. 2015; Vol. 10, no 22: 10511-10522.
11. Ruban D., Kraynyk L., Ruban H., Zakharova M. Burmistrov S. Khotunov V., Metelap V. Development of bus body technologies in terms of corrosion and durability. Eastern-European Journal of Enterprise Technologies. 2022; 3: 67-75.
12. Belov A.S. Organization of storage of motor vehicles in road transport. Avtomobil’nyj transport. 2015. no 2 (84). 18-21. (In Russ.)
13. Vasil’ev S.V. Organization of storage of vehicles: features and technologies. Logistika i upravlenie cepyami postavok. 2015; 2 (19): 22-26. (In Russ.)
14. Grigor’ev I.A. Organization and management of storage of vehicles in parking lots. Transport i hranenie nefti i gaza. 2016; 4 (31): 34-38. (In Russ.)
15. Ivanov I.V., Smirnov A.M. Organizaciya hraneniya avtotransportnyh sredstv na avtostoyankah: problemy i puti ih resheniya. Transportnoe delo Rossii. 2014; 2: 56-61. (In Russ.)
16. Kondrashina O.M. Organization of storage of vehicles on the fleets of transport companies. Vestnik Ufimskogo gosudarstvennogo aviacionnogo tekhnicheskogo universiteta. 2015;2 (16): 78-82. (In Russ.)
17. Sergeev A.I. Organization and management of vehicle warehouses. Logistika i upravlenie cepyami postavok. 2017; 3 (40): 48-52. (In Russ.)
18. Strahov I.V. Organization of storage of vehicles in parking lots: features and technologies. Gruzovoj transport. 2016; 6 (47): 32-37. (In Russ.)
19. Tihonov A.A. Organization of storage of vehicles in parking lots: problems and ways to solve them. Transportnoe delo Rossii. 2015; 6 (49): 25-29. (In Russ.)
20. Horeva E.A. Organization of storage of vehicles in parking lots: problems and solutions. Logistika i upravlenie cepyami postavok. 2014; 4 (15): 26-30. (In Russ.)
21. Chernyshov I.V. Organization of storage of vehicles in parking lots: problems and ways to solve them. TransportnoedeloRossii. 2016; 1 (54): 26-31. (In Russ.)
Review
For citations:
Melnikov A.N., Gorbachev S.V., Keyan E.G., Faskiev R.S. Technical operation factors influence on bus body durability. The Russian Automobile and Highway Industry Journal. 2024;21(1):108-118. (In Russ.) https://doi.org/10.26518/2071-7296-2024-21-1-108-118. EDN: FYUUWV