Preview

The Russian Automobile and Highway Industry Journal

Advanced search

Use of weight measurement algorithm on the basis of moving average filter in the recorder of overhead crane operation parameters

https://doi.org/10.26518/2071-7296-2023-20-4-418-431

EDN: CBIJMP

Abstract

Introduction. The problem of primary information low quality of crane operation parameters recorders is analyzed. The accepted direction to improve the quality of information about the mass of the cargo is to improve the algorithm of weight measurement. Shortcomings of algorithms of serially produced parameter recorders are described. The design of the algorithm based on the moving average filter is proposed.
Materials and Methods. The principle of operation of the proposed weight measurement algorithm is described. The algorithm consists of preliminary (determination of the dynamic process section suitable for weight measurement, calculation of the smoothing window length) and main stages (application of filter, calculation of mass and measurement error). Two methods for determining the length of the smoothing window are given. The parameters of the overhead crane, load cell and motor speed sensor used in the experimental part are given.
Results. Graphs of lifting mechanism force and motor rotation speed at the moment of weight measurement are given. The work of the steady-state motion control function is shown. The results of algorithm operation at fixed measurement accuracy of 3% with determination of algorithm operation time and fixed algorithm operation time of 10 seconds with determination of measurement accuracy are given.
Discussion. The time of weight measurement with the accuracy required for parameter recorders was 2...5 seconds. Increase in speed of weight measurement is achieved due to adjustable parameters of the algorithm at each switching on of the lifting mechanism. For cranes with duration of lifting time continuously more than 10 seconds the algorithm allows to calculate the mass of the load with an accuracy of 1%. This ensures the accuracy of the crane intensity indicators with an accuracy of 3%.
Conclusion. Evaluation of accuracy and time parameters showed the applicability of the developed algorithm of weight measurement in the task of determining the mass of the load to recorders of crane operation parameters. The advantage of the developed algorithm is the guaranteed accuracy of weight measurement. The algorithm of weight measurement allows to adapt the parameter recorder to the technological process of crane operation and effectively use the areas of the dynamic process suitable for measurement.

About the Authors

A. N. Nazarov
Bauman Moscow State Technical University
Russian Federation

Alexander N. Nazarov. Postgraduate student of the Hoisting and Transport Systems Department

Moscow



S. D. Ivanov
Bauman Moscow State Technical University
Russian Federation

Sergey D. Ivanov. Cand. of Sci., Associate Professor of the Hoisting and Transport Systems Department

Moscow



References

1. Polkvoj M. A. Analiz Federal’nyh norm i pravil, reglamentirujushhih process bezopasnoj jekspluatacii pod#emnyh sooruzhenij [Analysis of the Federal norms and rules regulating the process of safe operation of lifting structures]. Chrezvychajnye situacii: promyshlennaja i jekologicheskaja bezopasnost’. 2015; 1 (21): 65 – 75. EDN TKBISD. (In Russ.)

2. Voroncov D. S. Primenenie dannyh s registratorov parametrov raboty krana s cel’ju opredelenija resursa raboty gruzopod’emnyh kranov s istekshim srokom sluzhby [Application of the data from the crane operation parameters recorders in order to determine the resource of the hoisting cranes with the expired service life]. European Science. 2015; 3 (4): 10 – 17. EDN TXGUAB. (In Russ.)

3. Skosyrskij N. P., Dan’shin V. V., Budanov D. S. Ispol’zovanie registratorov parametrov raboty na mostovyh gruzopod’emnyh kranah, rabotajushhih so smennymi gruzozahvatnymi prisposoblenijami [The use of recorders of operation parameters on overhead lifting cranes operating with replaceable lifting devices]. Innovacii v stroitel’stve i promyshlennosti. 2016; 7 (9): 5. (In Russ.)

4. Ivanova N. Ju., Ivanov S. D., Nadezhenkov S. A., Nazarov A. N. Ob’ektivnaja informacija o rabote pod’emno-transportnyh mashin kak osnova povyshenija kachestva informacionnyh sistem gruzoobrabatyvajushhih predprijatij [Objective information about the operation of lifting and transport machines as a basis for improving the quality of information systems of cargo handling enterprises]. Mashiny i ustanovki: proektirovanie, razrabotka i jekspluatacija. 2023; 2: 81 – 96. EDN MRGIFShh. (In Russ.)

5. Ivanov S. D. Stend dlja izuchenija raboty ogranichitelja gruzopod’emnosti i registratora parametrov raboty mostovogo krana [A stand for studying the operation of the load capacity limiter and the recorder of the parameters of the bridge crane]. Mehanizacija stroitel’stva. 2012; 8 (818): 32-37. EDN PEShh-NOL. (In Russ.)

6. Brom A. E., Ivanov S. D., Shakarov K. K. Ispol’zovanie registratorov parametrov pri jekspluatacii mostovyh kranov [Use of parameter recorders in the operation of overhead cranes]. Mehanizacija stroitel’stva. 2016; T. 77, 6: 36 – 40. EDN VZYBZX. (In Russ.)

7. Skosyrskij N. P., Dan’shin V. V., Budanov D. S. Primenenie priborov bezopasnosti ZAO “ITC “KROS” [Application of safety devices of CJSC “RDC KROS”]. Promyshlennye i stroitel’nye tehnologii. 2016; 8 (10): 5. EDN VTPROD. (In Russ.)

8. Timin Ju. F., Sushinskij V. A. Opyt primenenija registratorov parametrov v Kranah mostovogo tipa [Experience in the application of parameter recorders in bridge-type cranes]. Pod’emno-transportnoe delo. 2009; 3 (53):12 – 14. EDN NDIICZ. (In Russ.)

9. Skosyrskij N. P., Dan’shin V. V., Budanov D. S. Vlijanie predvaritel’nyh porogov srabatyvanija ogranichitelja gruzopod’emnosti na dinamiku mostovogo krana [Influence of the preliminary thresholds of the capacity limiter operation on the dynamics of the overhead crane]. Promyshlennye i stroitel’nye tehnologii. 2016; 7 (9): 8. EDN VTPRKH. (In Russ.)

10. Ivanov S. D., Mihal’chik N. L. Sozdanie i jeksperimental’noe obosnovanie algoritma raboty vesoizmeritel’noj sistemy na baze registratora parametrov [Creation and experimental substantiation of the algorithm of the weight-measuring system based on the parameter recorde]. Pod’emno-transportnoe delo. 2019; 3-4 (97): 27 – 30. EDN WRJTFW. (In Russ.)

11. Ivanov S., D. Nazarov A. N., Mikhalchik N. L. Selection of a rational algorithm for data processing of the weight measuring system of a hoisting crane. Journal of Physics: Conference Series, Belgorod, 09–10 марта 2021 года. Vol. 1926. Belgorod: IOP Publishing Ltd, 2021. P. 012047. DOI 10.1088/1742-6596/1926/1/012047. EDN JIUUGG.

12. Pereverzev A. L. Adaptivnyj cifrovoj fil’tr na osnove skol’zjashhego srednego [Adaptive digital filter based on the moving average]. Izvestija vysshih uchebnyh zavedenij. Jelektronika. 2005; 2: 70-72. EDN HZNLZN. (In Russ.)

13. Mihalev A. V., Nazarov A. N. Primenenie algoritma skol’zjashhego srednego dlja zadachi opredelenija massy gruza [Application of the moving average algorithm for the problem of the cargo mass determination]. Mashiny i ustanovki: proektirovanie, razrabotka i jekspluatacija. 2023; 2: 44 – 57. EDN XLXJRI. (In Russ.)

14. Ivanov S.D., Nazarov A.N. Drive electrical parameters applicability evaluation to determine loads on bridge crane lifting mechanism. The Russian Automobile and Highway Industry Journal. 2022;19 (1): 36 – 47. (In Russ.) https://doi.org/10.26518/2071-7296-2022-19-1-36-47

15. Nazarov A.N. Motor driving force of bridgetype crane lifting mechanism under real operating use. The Russian Automobile and Highway Industry Journal. 2023;20(1):34 – 50. (In Russ.) https://doi.org/10.26518/2071-7296-2023-20-1-34-50


Review

For citations:


Nazarov A.N., Ivanov S.D. Use of weight measurement algorithm on the basis of moving average filter in the recorder of overhead crane operation parameters. The Russian Automobile and Highway Industry Journal. 2023;20(4):418-431. (In Russ.) https://doi.org/10.26518/2071-7296-2023-20-4-418-431. EDN: CBIJMP

Views: 288


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2071-7296 (Print)
ISSN 2658-5626 (Online)