Study of crack formation and limit equilibrium of reinforced concrete florr slab shell
https://doi.org/10.26518/2071-7296-2022-19-5-762-776
Abstract
Introduction. Experimental studies of crack formation and limit equilibrium of a reinforced concrete floor slab-shell, developed by the authors, were carried out.
Materials and methods. The studies were carried out on reinforced concrete models made on a scale of 1:5.
Results. During the tests, three stages of the stress-strain state were established: the first is the elastic stage of concrete tensile work in the lower part of the longitudinal contour ribs; the second is the stage of formation and opening of cracks; the third is the stage of destruction.
Discussion and conclusions. The first stage is observed from the beginning of loading until the moment of cracks formation in the longitudinal ribs, the second is between the end of the first stage and the beginning of the destruction of the ribs, the third is during the destruction of the flange and ribs of the models.
About the Authors
A. V. Selivanov
Siberian State Automobile and Highway University (SibADI)
Russian Federation
Russian Federation
Anton V. Selivanov – Senior Lecturer, Bridges and Tunnels Department
Omsk
F. F. Reger
ZAO PIRS
Russian Federation
Russian Federation
Fedor F. Reger – Cand. of Sci.
Omsk
I. A. Chakurin
Siberian State Automobile and Highway University (SibADI)
Russian Federation
Russian Federation
Ivan A. Chakurin – Cand. of Sci., Associate Professor, Bridges and Tunnels Department
Omsk
References
1. Borovskih A. V. Issledovanie naprjazhenno-deformirovannogo sostojanija zhelezobetonnyh plit-obolochek [Investigation of the stress-strain state of reinforced concrete shell plates]. Obzorno-analiticheskij i nauchno – tehnicheskij zhurnal Stroitel’naja mehanika inzhenernyh konstrukcij i sooruzhenij. Moscow, 2008. pp.82-86. (In Russ.)
2. Borovskih A. V. Issledovanie naprjazhenno-deformirovannogo sostojanija zhelezobetonnyh plit-obolochek [Investigation of the stress-strain state of reinforced concrete shell plates]. Obzorno-analiticheskij i nauchno – tehnicheskij zhurnal Stroitel’naja mehanika inzhenernyh konstrukcij i sooruzhenij. Moscow, 2008. pp.82-86. (In Russ.)
3. John F. Abel. The future of spatial structures // Fifty Years of Progress for Shell and Spatial Structures. Brentwood. UK: Multi Science Publishing Co Ltd., 2011. рp. 485-490.
4. Baranova T. I., Sil’vanovich T. G., Bormotov A. N., Selivanov M. Ju. Realizacija konstrukcionno-tehnologicheskih osobennostej zhelezobetona pri razrabotke novyh tipov panelej perekrytij [Implementation of structural and technological features of reinforced concrete in the development of new types of floor panels]. Izvestija vuzov. Stroitel’stvo. 1997; 4: 7–9. (In Russ.)
5. Kopsha S. P., Zaikin V. A. Tehnologija bezopalubochnogo formovanija – kljuch k modernizacii promyshlennosti i snizheniju sebestoimosti zhil’ja [Technology of formless molding – the key to modernization of industry and reduction of housing costs]. Tehnologii betonov. 2013; 11: 29-33. (In Russ.)
6. Selivano A.V., Reger F.F. Results of experimental research of the reinforced concrete shellslab. The Russian Automobile and Highway Industry Journal. 2019;16(3):378-392. (In Russ.) https://doi.org/10.26518/2071-7296-2019-3-378-392
7. Selivanov A.V., Reger F.F., Chakurin I.A. On influence of structural features on stress-strain state of a reinforced concrete floor slab. The Russian Automobile and Highway Industry Journal. 2022;19(3):446-460. (In Russ.) https://doi.org/10.26518/2071-7296-2022-19-3-446-460
8. Bajkov V. N., Sigalov Je. E. Zhelezobetonnye konstrukcii: Obshhij kurs [Reinforced concrete structures: General course]. Moscow: Strojizdat. 1991. 767 p. (In Russ.)
9. Hajdukov G. K. Jeksperimental’noe issledovanie predvaritel’no-naprjazhennyh stupenchato-vsparushennyh (shatrovyh) panelej [. Experimental study of pre-stressed step-raised (hipped) panels]. Vyp. 11. Moscow, 1961. 109 p. (In Russ.)
10. Hajdukov G. K., Mageramov Je. A. Issledovanie predvaritel’no-naprjazhennyh sbornyh pologih panelej-obolochek peremennoj tolshhiny na kvadratnom plane [Investigation of prestressed prefabricated sloping panels-shells of variable thickness on a square plan]. Trudy Azerbajdzhanskij NIIstrojmaterialov im. V. A. Dadasheva. 1967. 52 p. (In Russ.)
11. Ljudkovskij A. M. O vybore masshtaba pri modelirovanii zhelezobetonnyh obolochek [On the choice of scale in the modeling of reinforced concrete shells // Spatial structures of buildings and structures]. Prostranstvennye konstrukcii zdanij i sooruzhenij. Moscow: Strojizdat. 1985. Vyp.5. pp.75-81. (In Russ.)
12. Stel’mah S. I., Hajdukov G. K. Rekomendacii po issledovaniju prostranstvennyh konstrukcij na modeljah [Recommendations for the study of spatial structures on models]. Prostranstvennye konstrukcii zdanij i sooruzhenij. Moscow, 1972; Vyp.1:164-181. (In Russ.)
13. Hajdukov G. K., Shugaev V. V., Krakovskij M. B. Modelirovanie pri issledovanii zhelezobetonnyh prostranstvennyh konstrukcij [Modeling in the study of reinforced concrete spatial structures]. Raschet i konstruirovanie zhelezobetonnyh konstrukcij. Moscow, Strojizdat. 1972. (In Russ.)
14. Chinenkov Ju. V. Metodika issledovanija obolochek i skladok na modeljah [Methodology for the study of shells and folds on models]. Trudy instituta/ NIIZhB Gosstroja SSSR. M.1974. vyp. 9. Issledovanija zhelezobetonnyh prostranstvennyh konstrukcij na modeljah. (In Russ.)
15. Jarmul’nik F. V., Sharapov G. V., Gajduk V. G. Metodika podbora materiala pri issledovanijah zhelezobetonnyh konstrukcij na modeljah [Technique of selection of material in the study of reinforced concrete structures on models]. Kiev. 1975. (In Russ.)
Review
For citations:
Selivanov A.V., Reger F.F., Chakurin I.A. Study of crack formation and limit equilibrium of reinforced concrete florr slab shell. The Russian Automobile and Highway Industry Journal. 2022;19(5):762-776. (In Russ.) https://doi.org/10.26518/2071-7296-2022-19-5-762-776
Views:
384
Email this article 