Monitoring of the state of electromagnetic fuel injectors of gasoline engines with distributed fuel injection systems
https://doi.org/10.26518/2071-7296-2021-18-5-524-533
Abstract
Introduction. Ensuring the trouble-free operation of road transport is one of the priority tasks. The functioning of the internal combustion engine, the most important unit, is impossible without the correct operation of the fuel injectors. A modern electromagnetic nozzle is a fairly reliable element of the engine, however, it can quickly fail when using low-quality fuel. Constant monitoring of the technical condition of the injectors with the help of builtin vehicle diagnostics systems will prevent such negative consequences as fuel overspending, the formation of harmful substances in the exhaust gases, deterioration of the traction and speed characteristics of the vehicle.
Materials and methods. The research was carried out by the method of physical modelling, a laboratory stand was developed that simulates the operation of the engine fuel system. As an object, the Bosch 0280 158 996 nozzle was selected, which was controlled using an Arduino-based electronic unit. A series of one-factor experiments was carried out, according to the results of which the dependence of the pressure drop rate on the contamination of the nozzle was constructed.
Results. The permissible standard of the pressure drop rate during the operation of the electromagnetic nozzle is determined, which allows unambiguously determining its technical condition (serviceable/not serviceable). An algorithm for checking injectors is proposed, as well as a method for its implementation on modern passenger cars.
Discussion and conclusion. The obtained dependence qualitatively coincides with the results of studies by other authors. There is a successful experience of implementing such algorithms on modern cars. The implementation of the research results will allow timely detection of faulty (contaminated) electromagnetic injectors and prevent negative effects on both engine parts and the environment.
About the Authors
G. N. Votinov
Perm National Research Polytechnic University
Russian Federation
Russian Federation
Georgij N. Votinov – Cand. of Sci., Associate Professor, Associate Professor of the General Physics Department
Perm
SPIN-код: 3870-1069; AuthorID: 112901
D. V. Maltsev
Perm National Research Polytechnic University
Russian Federation
Russian Federation
Dmitry V. Maltsev – Cand. of Sci., Associate Professor, Associate Professor of the Cars and Technological Machines Department
Scopus ID 57212413474, SPIN-code: 5484-9395; AuthorID: 659132
Perm
D. S. Repetsky
Perm National Research Polytechnic University
Russian Federation
Russian Federation
Dmitry S. Repetsky – Cand. of Sci., Associate Professor of the Cars and Technological Machines Department
Perm
References
1. Mal’cev D.V., Pestrikov S.A., Utrobin V.YU. Vliyanie uslovij ekspluatacii na nadezhnost’ gruzovyh avtomobilej na baze shassi KamAZ [The influence of operating conditions on the reliability of trucks based on the KAMAZ chassis].Chemistry. Ecology. Urban studies, 2019, 2: 129-133 (In Russian)
2. SHaihov R.F. Analiz pokazatelej nadezhnosti korobok otbora moshchnosti gruzovyh avtomobilej [Analysis of reliability indicators of power take-off boxes of trucks].Transport. Transport facilities. Ecology, 2019, 4: 67-73 (In Russian)
3. SHaihov R.F. Opredelenie ostatochnogo resursa detalej navesnogo oborudovaniya special’nyh avtomobilej [Determination of the residual life of the parts of the attachments of special vehicles].Transport. Transport facilities. Ecology,2019, 3: 83-88 (In Russian)
4. SHaihov R.F. Kontrol’ proizvodstvennogo personala na avtotransportnom predpriyatii [Control of production personnel at a motor transport enterprise]. Transport. Transport facilities. Ecology,2019, 3: 89-95 (In Russian)
5. Vasil’ev A. V., Berezyukov D. S. Sovershenstvovanie diagnostirovaniya elektromagnitnyh forsunok benzinovyh dvigatelej na osnove ocenki ih dinamicheskoj proizvoditel’nosti [Improving the diagnosis of electromagnetic injectors of gasoline engines based on the assessment of their dynamic performance].Bulletin of the Volgograd State University. Series 10: Innovative activity, 2012, 6: 11-15 (In Russian)
6. Vasil’ev A. V., Berezyukov D. S. Sovershenstvovanie diagnostiki toplivnyh forsunok porshnevyh dvigatelej s raspredelennym vpryskom topliva [Improvement of diagnostics of fuel injectors of piston engines with distributed fuel injection ].Proceedings of the Volgograd State Technical University, 2011, 8(81): 20-23 (In Russian)
7. Jin, Y., Qiao, X., Gu, C., Guo, H., & Ning, C. A method for fault diagnosis of fuel injector of diesel engine based on res-CNN and fuel pressure wave //Qiche Gongcheng/Automotive Engineering. 2021, 43(6): 943-951. doi:10.19562/j.chinasae.qcgc.2021.06.019
8. Wang, J. -., Wang, Z. -., Ma, X. -., & Yuan, Z Decoupling and diagnosis of multi-fault of diesel engine fuel system //Kongzhi Yu Juece/Control and Decision. 2019, 34(10), pp. 2249-2255. doi:10.13195/j.kzyjc.2018.026
9. Gong, W., Chen, H., Zhang, M., & Zhang, Z. Intelligent diagnosis method for incipient fault of motor bearing based on deep learning //Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument. 2020, 41(1): 195-205. doi:10.19650/j.cnki.cjsi.J1905073
10. Stoeck, T. Analytical methodology for testing common rail fuel injectors in problematic cases //Diagnostyka. 2021, 22(2): 47-52. doi:10.29354/DIAG/135999
11. Kluczyk, M., & Grządziela, A. Vibration diagnostics of common rail injectors //Journal of Marine Engineering and Technology. 2021, 16(4): 177-184. doi:10.1080/20464177.2017.1387088 (In Eng.)
12. Stoeck, T., Osipowicz, T., & Abramek, K. F. Methodology for the repair of denso common rail solenoid injectors. [Metodyka naprawy wtryskiwaczy elektromagnetycznych układów zasilania Common Rail Denso] Eksploatacja i Niezawodnosc. 2014, 16(2): 270-275
13. Sarwar, A., Sankavaram, C., & Lu, X. Diagnosis and prognosis of fuel injectors based on control adaptation //Paper presented at the Proceedings of the Annual Conference of the Prognostics and Health Management Society, PHM. 2017: 467-476
14. Mohapatra, C. K., Schmidt, D. P., Sforozo, B. A., Matusik, K. E., Yue, Z., Powell, C. F., Martínez, M. Collaborative investigation of the internal flow and near-nozzle flow of an eight-hole gasoline injector (engine combustion network spray G) //International Journal of Engine Research. 2020 doi:10.1177/1468087420918449
15. Medina, M., Fatouraie, M., & Wooldridge, M. High-speed imaging studies of gasoline fuel sprays at fuel injection pressures from 300 to 1500 bar //SAE Technical Papers. 2018-April doi:10.4271/2018-01-0294
16. Ishima, T., Sukena, R., Obokata, T., Kawachi, K., & Kobayashi, K. Study on diagnostic methods to evaluate the relationship between fuel injection pattern and spray characteristics at the swirl nozzle injector //Transactions of the Japan Society of Mechanical Engineers. 2003, Part B, 69(678), pp. 504-511. doi:10.1299/kikaib.69.504
17. Dong, X., Yang, J., Hung, D. L. S., Li, X., & Xu, M. Effects of flash boiling injection on in-cylinder spray, mixing and combustion of a spark-ignition direct- injection engine //Proceedings of the Combustion Institute. 2019, 37(4), pp. 4921-4928. doi:10.1016/j.proci.2018.09.014
18. Hwang, J., Weiss, L., Karathanassis, I. K., Koukouvinis, P., Pickett, L. M., & Skeen, S. A. Spatio-temporal identification of plume dynamics by 3D computed tomography using engine combustion network spray G injector and various fuels // Fuel. 2020, 280 doi:10.1016/j.fuel.2020.118359
19. Yang, J., Xu, M., Hung, D. L. S., Wu, Q., & Dong, X. Influence of swirl ratio on fuel distribution and cyclic variation under flash boiling conditions in a spark ignition direct injection gasoline engine //Energy Conversion and Management. 2017, 138, pp. 565-576. doi:10.1016/j.enconman.2017.02.024
20. Costa, M., Sorge, U., Merola, S., Irimescu, A., La Villetta, M., & Rocco, V. Split injection in a homogeneous stratified gasoline direct injection engine for high combustion efficiency and low pollutants emission //Energy. 2016, 117, pp. 405-415. doi:10.1016/j.energy.2016.03.065
21. Mohan, B., Du, J., Sim, J., & Roberts, W. L. Hydraulic characterization of high-pressure gasoline multi-hole injector //Flow Measurement and Instrumentation. 2018, 64, pp. 133-141. doi:10.1016/j.flowmeasinst.2018.10.017
22. Cavicchi, A., Sparacino, S., Berni, F., Postrioti, L., & Fontanesi, S. Evaluation of the single jet flow rate for a multi-hole GDI nozzle //Paper presented at the AIP Conference Proceedings. 2019, 2191 doi:10.1063/1.5138776
23. Gritsenko, A., Shepelev, V., Zadorozhnaya, E., & Shubenkova, K. Test diagnostics of engine systems in passenger cars //FME Transactions. 2020, 48(1),pp. 46-52. doi:10.5937/fmet2001046G
24. Ovchinnikov G.V., Kozlov S.A. Vliyanie zagryaznenij elektromagnitnyh forsunok na ih pokazateli [Theinfluenceofcontaminationofelectromagneticinjectorsontheirperformance].Electronics and electrical equipment of transport. 2007, 4: 45–46 (In Russian)
25. Makushev, YU. P., Filatov A. V., Mihajlova L. YU. Metodika diagnostiki toplivnoj apparatury dizelya po izmeneniyu davleniya na vhode v forsunku i dvizheniya igly [The method of diagnostics of diesel fuel equipment by changing the pressure at the inlet to the nozzle and the movement of the needle].Modernization and scientific research in the transport complex. 2012, 1: 347-354 (In Russian)
Review
For citations:
Votinov G.N., Maltsev D.V., Repetsky D.S. Monitoring of the state of electromagnetic fuel injectors of gasoline engines with distributed fuel injection systems. The Russian Automobile and Highway Industry Journal. 2021;18(5):524-533. (In Russ.) https://doi.org/10.26518/2071-7296-2021-18-5-524-533
Views:
610
Email this article 