INTERACTION ANALYSIS OF THE CONSOLE KNIFE SURFACE WITH THE SOIL

Introduction. In Russia the use of cyclical equipment to remove the top layer of the soil is not feasible. The problem of the roads construction accelerating, improving their quality can be solved by applying a continuous action unit to form a litter layer. The main working bodies of the unit are buckets, including lower knives, right knives and console knives. A console knife contains the edge of the blade, the front face of the blade, the surface and the lower plane. The analysis of the interaction with the ground elements of the continuous action unit console knife is of theoretical and practical interest.

The method of research. A consistent impact of many console knives on the ground within the width of the capture unit by the impact of one conventional console knife on the ground at a distance needed to develop one cubic meter of soil is replaced. The interaction forces of the conventional console knife with the ground are called conventional forces. The method of calculating energy costs when introducing a console knife into the ground is presented: to overcome the pressure of the ground on the front face of the console knife, to lift the ground, to vertical acceleration of the soil of the front bevel, to overcome the friction of the ground on the front face and to overcome the friction of the ground on the lower plane of the console knife. The total energy costs of the interaction of the console knife with the ground volume of one cubic meter are obtained by the addition of private energy expenditures.

Results. On the basis of the developed method, energy costs are calculated when introducing a console knife into the ground: to overcome the pressure of the ground on the front face of the console knife, to lift the ground, to vertical acceleration of the soil of the front bevel, to overcome the friction of the ground on the front face and to overcome the friction of the ground on the lower plane of the console knife. The total energy costs and their structure when the console knife interacts with the ground volume of one cubic meter are defined. The horizontal longitudinal force needed to move the console knife has been determined.

Conclusion. The total energy needed to cut the ground with console knives is about 20 kJ/cub.m. At the same time energy costs for the interaction of console knives blades edges with soil about 7,000 J/cub.m, on the interaction of the packing console knives blades with the ground about 6,000 J/cub.m, to overcome the ground friction on the lower plane of the console knife 7, 000 J/cub.m. To determine the total energy costs of cutting the ground with buckets of the unit to remove the top layer of the soil from the underlying layer of the road, the interaction with the soil of other elements of the bucket is necessary to be analyzed.

1. Nikolayev V.A. Opredelenie skorosti cepej i razmerov plasta grunta, otrezaemogo kovshom agregata dlya udaleniya verhnego sloya grunta s podstilayushchego sloya avtodorogi [Determining the speed of chains and the size of the soil layer cut off by the bucket of the unit to remove the top layer of soil from the underlying layer of the road]. The Russian Automobile and Highway Industry Journal. 2020; 1: 32–43. (in Russian)

2. Nikolayev V.A. Analiz vzaimodejstviya kromki lezviya konsol’nogo nozha s gruntom [Analysis of the interaction of the edge of the console knife blade with the soil]. The Russian Automobile and Highway Industry Journal. 2020; 2 : 172–181. (in Russian)

3. Zhuk A.F. Teoreticheskoe obosnovanie racional’noj tekhnologicheskoj skhemy i parametrov rotacionnogo pluga [Theoretical justification of the rational technological scheme and parameters of the rotary plough]. Sbornik nauchnyh trudov «Teoriya i raschyot pochvoobrabatyvayushchih mashin». 1989; 120: 145-153. (in Russian)

4. Popov G.F. Rabochie organy frez [Working bodies of milling cutters]. Materials VISHOM NTS. ONTI VISHOM. 1970; 27: 490–497. (in Russian)

5. Karasyev G.N. Opredelenie sily rezaniya grunta s uchyotom uprugih deformacij pri razrushenii [Determination of the ground cutting force taking into account elastic deformations during destruction]. Construction and road machinery. 2008; 4: 36–42. (in Russian)

6. Karnaukhov A.I.. Orlovskiy S.N Opredelenie zatrat udel’noj energii na process rezaniya lesnyh pochv torcevymi frezami [Determination of specific energy costs for the process of cutting forest soils with end mills]. Construction and road machinery. 2010; 1: 20–22. (in Russian)

7. Kravets I.M. Opredelenie kriticheskoj glubiny rezaniya pri kombinirovannom rezanii gruntov gidrofrezoj [Critical depth of the cut determination in the combined cutting soil by hydromiller]. Construction and road machinery. 2010; 5: 47–49. (in Russian)

8. Kirillov F.F. Determinirovannaya matematicheskaya model’ vremennogo raspredeleniya tyagovogo usiliya dlya mnogorezcovyh rabochih organov zemlerojnyh mashin [Deterministic mathematical model of the traction force time distribution for multi-section working bodies of earthmoving machines]. Construction and road machinery. 2010; 11: 44-48. (in Russian)

9. Berestov E.I. Vliyanie treniya grunta po poverhnosti nozha na soprotivlenie rezaniyu [Soil friction effect on the knife surface on cutting resistance]. Construction and road machinery. 2010; 11: 34–38. (in Russian)

10. Vershinin A.V., Subov V.S., Tyulnev A.M. Povyshenie effektivnosti diskofrezernyh rabochih mekhanizmov dlya razrabotki myorzlyh gruntov [Improving the efficiency of disc milling working mechanisms for the development of frozen soils]. Construction and road machinery. 2012; 8: 42–44. (in Russian)

11. Balovnev V.I., Nguen Z.SH. Opredelenie soprotivlenij pri razrabotke gruntov ryhlitelem po integral’nomu pokazatelyu prochnosti [Determination of resistance in the soil development with a ripper according to the integral strength indicator]. Construction and road machines. 2005; 3: 38–40. (in Russian)

12. Ryabets N., Kurzhner F. Weakening of frozen soils by means of ultra-high frequency energy. Cold Regions Science and Technology. 2003; 36: 115–128.

13. Liu X., Liu P. Experimental research on the compressive fracture toughness of wing fracture of frozen soil. Cold Regions Science and Technology. 2011; 65: 421–428.

14. Talalay P.G. Subglacial till and Bedrock drilling. Cold Regions Science and Technology. 2013; 86: 142- 166.

15. Sun X. ACT-timely experimental study on meso-scopic damage development of frozen soil under triaxial shearing. Rock and Soil Mechanics. 2005; 8: 150-163.

16. Li Q. Development of Frozen Soil Model. Advances in Earth Science. 2006; 12: 96-103.

17. Atkinson J. The Mechanics of Soils and Foundations. CRC. Press. 2007; 448.

18. Balovnev V.I., Danilov R.G., Ulitich O.Yu. Issledovanie upravlyaemyh nozhevyh sistem zemlerojno-transportnyh mashin [Research of controlled knife systems of earth moving and transport vehicles]. Construction and road vehicles. 2017; 2: 12–15. (in Russian)

19. Nilov V.A., Fyodorov E.V. Razrabotka grunta skreperom v usloviyah svobodnogo rezaniya [Soil development with a scraper in free cutting conditions]. Construction and road machines. 2016; 2: 7–10. (in Russian)

20. CHmil’ V.P. Nasosno-akkumulyativnyj privod ryhlitelya s avtomaticheskim vyborom ugla rezaniya [Pump-accumulator ripper drive with an automatic choice of a cutting angle]. Construction and road machines. 2016; 11: 18–20. (in Russian)

21. Kabashev R.A., Turgumbaev S.D. Eksperimental’nye issledovaniya processa kopaniya gruntov rotorno-diskovymi rabochimi organami pod gidrostaticheskim davleniem [Experimental studies of the soil digging process with a rotary-disk working bodies under the hydrostatic pressure]. The Russian Automobile and Highway Industry Journal. 2016; 4: 23–28.

22. Syomkin D.S. O vliyanii skorosti rabochego organa na silu soprotivleniya rezaniyu grunta [On the speed influence of the working body on the resistance strength to cutting soil]. The Russian Automobile and Highway Industry Journal. 2017; 1: 37–43. (in Russian)

23. Konstantinov Yu.V. Metodika raschyota soprotivleniya i momenta soprotivleniya rezaniyu pochvy pryamym plastinchatym nozhom frezy [Method for calculating the resistance and a resistance moment to cutting soil with a straight plate cutter knife]. Tractors and agricultural machines. 2019; 5: 31–39. (in Russian)

24. Syromyatnikov Yu.N., Hramov I.S., Vojnash S.A. Gibkij element v sostave rabochih organov rotornoj pochvoobrabatyvayushchej ryhlitel’nosepariruyushchej mashiny [Flexible element in the working bodies of a rotary tillage and ripper separation machine]. Tractors and agricultural machines. 2018; 5: 32–39. (in Russian)

25. Parhomenko G.G., Parhomenko S.G. Silovoj analiz mekhanizmov peremeshcheniya rabochih organov pochvoobrabatyvayushchih mashin po zadannoj traektorii [Power analysis of mechanisms for moving working bodies of tillage machines along a given trajectory]. Tractors and agricultural machines. 2018; 1: 47–54. (in Russian)

26. Dranyaev S.B., CHatkin M.N., Koryavin S.M. Modelirovanie raboty vintovogo G-obraznogo nozha pochvoobrabatyvayushchej frezy [Modeling the operation of a screw l-shaped knife of a tillage mill]. Tractors and agricultural machines. 2017; 7: 13–19. (in Russian)

27. Nikolayev V.A. Mashiny dlya obrabotki pochvy. Teoriya i raschyot [Machines for soil processing. Theory and calculation]. Yaroslav, FGBOU VO YAGSKHA. 2014; 358. (in Russian)