COMPOUND RUNS OF LOGS CALCULATION: ACCOUNTING OF LONGITUDINAL FORCES’ AND BENDING MOMENTS’ INTERACTION

Introduction. Studying the designing and constructing experience of beam bridges with composite log girders indicates the possibility of the load bearing capacity rising of the structures and their further usage in the IV and V categories bridges’ construction under A-11 and H-11 loads. The purpose of the research is to evaluate the effect on the magnitude and distribution of shear forces in shear bonds, considering the permissible pliability of fixation in wood and on the nature of the stress state change in the rods of the composite girders.

Materials and methods. The authors presented the construction of the composite girder in the form of three rows united by means of tie bolts and gaskets of four-tier single-row composite girders and made of edged logs. The proposed studying method of a composite girder stress-strain state with discrete placement of concentrated shear bonds in the joints based on the classical method of forces for rod systems, taking into account the interaction of longitudinal forces and bending moments arising in the rods composing the girder of unknown forces in the shear bonds.

Results. The determination of single displacements with joint account of bending and stretching-compression deformations haв a significant impact on the redistribution of shear forces in the direction of increasing them in the support zones and reducing them in the middle of the span, and, consequently, on the design of the connecting elements. The character of distribution of normal stresses on the stretching-compression indicated the rods’ girders between relationships under the eccentric compression (stretching).

Discussion and conclusions. The proposed solutions demonstrate the most accurate assessment of the composite girders in the structures of spans wooden bridges and present the application possibility in modern conditions.

Financial transparency: the authors have no financial interest in the presented materials or methods. There is no conflict of interest.

1. Stukov V.P. Derevozhelezobetonnye balochnye mosty: sostojanie, teorija, issledovanija, proektirovanie: monografija [Wood concrete beam bridges: condition, theory, research, design: monograph]. 2014: 315. (in Russian)

2. Utkin V.A., Kobzev P.N. Avtodorozhnye derevjannye mosty novogo pokolenija: monografija. [Road wooden bridges of the new generation: monograph.]. Omsk: Izd-vo SibADI, 2004: 56. (in Russian)

3. Utkin V.A., Puzikov V.I., Shishova T.A. O primenenii drevesiny dlja stroitel’stva mostov novogo pokolenija v Omskoj oblasti [On the Use of Wood for the Construction of New Generation Bridges in the Omsk Region]. Stroitel’nye materialy. 2006; 1: 28-30. (in Russian)

4. Utkin V.A., Puzikov V. I., Kobzev P.N. Opyt vnedrenija novyh doschato-gvozdevyh proletnyh stroenij v dorozhnom stroitel’stve Omskoj oblasti [Experience of introduction of new additional-nail overflights in road construction of Omsk region]. Dorogi i mosty: sbornik. 2008; 19/1: 162-171. (in Russian)

5. Utkin V.A., Puzikov V.I., Kazantsev B.V., Karetnikov M.Ju. O primenenii drevesiny dlja stroitel’stva mostov [On the use of wood for bridge construction]. Dorogi i mosty. 2014; 32/2: 127–142. (in Russian)

6. Utkin V.A., Sinigovskaja N.V. Issledovanie nesuschej sposobnosti sostavnyh progonov s soedinenijami na gluhih tsilindricheskih nageljah, zaschemlennyh v stal’nyh plastinah [Research of bearing capacity of composite girders with connections to the deaf cylindrical pins, clamped in steel plates]. Vestnik SibADI. 2016; 5(51): 134–145. (in Russian)

7. Utkin V.A., Kobzev P.N., Shatunova E.G. Development and improvement of beam structures on the basis of composite logs’ girders. The Russian Automobile and Highway Industry Journal. 2018;15(5):760-773. (In Russ.) https://doi. org/10.26518/2071-7296-2018-5-760-773

8. Rozhko P.P., Kulish V.I. Issledovanie nesuschej sposobnosti stal’nyh nagelej v derevobetonnyh mostah [Study of the bearing capacity of the steel pins in bridges]. Trudy HabPI. 1966; 3: 21-26. (in Russian)

9. Kulish V.I. Issledovanie raboty i raschet na prochnost’ derevozhelezobetonnyh balok [Study of work and strength calculation of wood-concrete beams]. Stroitel’stvo zheleznyh dorog i `ekspluatatsija puti. Habarovsk, HabIIZhT, 1967: 120–127. (in Russian)

10. Shumaher A.V. `Eksperimental’noe issledovanie zhestkosti nagel’nyh svjazej, ob”edinennyh derevobetonnyh balok pod dejstviem mnogokratno-povtornoj nagruzki [Experimental study of the stiffness of the bolted connections of the combined wood-concrete beams under the influence of a multiple-repeated load]. Sbornik nauchnyh trudov. Omsk, Zapadno-sibirskoe izdatel’stvo. 1970; 2: 30–43. (in Russian)

11. Haakana P., Jutila A., Rautakorpi H., Salokangas L. Research project development of wood bridges, survey of source document. Exept of the Finnich Report Survey of background information. Helsinki University of Technology, Laboratory of bridge Engineering. 1993; 2: 46.

12. Wiio M., Jutila A., Makipuro R., Salokangas L.,Wistbaka J. Research project development of wood bridges, literature survey of shear connections of wood-concret composite bridges. Helsinki University of Technology, Laboratory of bridge Engineering. 1994; 7: 14.

13. Makipuro R., Jutila A., Rautakorpi H., Salokangas L. Research project development of wood bridges, experimental studies of wood-concret shear connections. Helsinki University of Technology, Laboratory of bridge Engineering. 1994; 11: 26.

14. Smirnov P.N. Sravnenie metodik rascheta nagel’nyh soedinenij derevjannyh konstruktsij. Ote-chestvennyj i zarubezhnyj opyt [Comparison of methods of calculation dowel joints of wooden structures. Domestic and foreign experience]. Stroitel’naja mehanika i raschet sooruzhenij. 2013; 6: 68–72. (in Russian)

15. Smirnov P.N. Osobennosti raboty nagel’nyh soedinenij so stal’nymi nakladkami i proklad-kami. Metodika rascheta [Features the work of pin joints with steel plates and gaskets. Method of calculation]. Stroitel’naja mehanika i raschet sooruzhenij. 2015; 2: 19–25. (in Russian)

16. Nikitin G.V. K voprosu o vlijanii zhestkosti uzlov v prostranstvennyh sterzhnevyh sistemah [To the question of the influence of the stiffness of nodes in spatial rod systems]. Sbornik nauchnyh trudov. 1936; 3: 58-62. (in Russian)

17. Dmitriev P.A. Issledovanie prochnosti drevesiny na smjatie v otverstii pri kratkovremennom i dlitel’nom dejstvii nagruzki [Study of the strength of the wood to crumple in the hole at short-term and long-term load]. Izvestija vuzov. Stroitel’stvo i arhitektura. 1965;12:165– 173. (in Russian)

18. Labudin B.V. Sovershenstvovanie kleenyh derevjannyh konstruktsij s prostranstvenno- reguljarnoj strukturoj [Improvement of glued wooden structures with spatial and regulatory structure: monograph.]. Arhangel’sk: Izd-vo AGTU, 2007: 276. (in Russian)

19. Labudin B.V. Raschet prostranstvennyh konstruktsij s uchetom deformativnoj podatlivosti svja-zej (razvitie idej P.A. Dmitrieva, V.M. Kochenova, V.A Lebedeva, G.V. Nikitina i dr.) [Calculation of spatial structures taking into account the deformative compliance of Svya-zei (development of ideas of P.A. Dmitry, V.M. Kochenova, V.A. Lebedev, G.V. Nikitin, etc.)]. Izvestija vuzov Stroitel’stvo. 2013; 11-12/2013:1- 12. (in Russian)

20. Rzhanitsin A.R. Rabota svjazej v sostavnyh sterzhnjah [Link work in composite rods]. Tekst. Nauchn. tr. MISI im. V.V. Kujbysheva. 1938; 2: 29-32. (in Russian)